Before removing the proximity sensor module, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 36
).
5.
Remove the tablet battery (see
Tablet battery on page 37
).
Remove the proximity sensor module:
1.
Disconnect the proximity sensor module cable
(1)
from the system board.
2.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the proximity sensor module to the display
assembly.
3.
Remove the proximity sensor module
(3)
and cable.
Reverse this procedure to install the proximity sensor module.
Webcamera/microphone module
Description
Spare part number
Webcamera/microphone module (includes double-sided adhesive and grounding tape)
736900-001
NOTE:
The webcamera/microphone module does not include the webcamera/microphone module cable. The webcamera/
microphone module cable is included in the Cable Kit, spare part number 742103-001. See
Cable Kit on page 21
for more Cable Kit
spare part information.
Removal and replacement procedures
39
Содержание Spectre 13x2 Pro
