HP Spectre 13x2 Pro, Руководство по техническому обслуживанию и ремонту

Страница: 77 / 103

Keyboard base battery
Description Spare part number
2-cell, 18-WHr, 2.45-AHr, Li-ion battery (for use only in the keyboard base, includes cable) 741523–005
Before removing the keyboard base battery, follow these steps:
1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off
or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet
and keyboard base.
3. Disconnect the tablet from the keyboard base.
4. Remove the bottom cover (see Bottom cover on page 65 ).
5. Remove the I/O board (see I/O board on page 66 ).
6. Remove the TouchPad (see TouchPad on page 68 ).
WARNING! To reduce potential safety issues, use only the battery provided with the keyboard base, a
replacement battery provided by HP, or a compatible battery purchased from HP.
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To
prevent loss of information, save your work or shut down the tablet through Windows before removing the
battery.
Remove the keyboard base battery:
1. Remove the four Phillips PM2.0×3.25 screws (1) that secure the keyboard base battery to the
keyboard base.
2. Lift the rear corners of the keyboard base battery (2) until it rests at an angle.
Removal and replacement procedures 69