HP ProBook 4325s - Notebook PC Скачать руководство пользователя страница 72

Страница: 72 / 196

Typical uses include the following:

●

Storage of large amounts of data

●

High-definition video playback and storage

●

Video games

NOTE:

As Blu-ray is a new format containing new technologies, certain disc, digital connection,

compatibility and/or performance issues may arise, and do not constitute defects in the product. Flawless
playback on all systems is not guaranteed.

Playing a CD, DVD, or BD

Turn on the computer.

Press the release button

(1)

on the drive bezel to release the disc tray.

Pull out the tray

(2)

Hold the disc by the edges to avoid touching the flat surfaces and position the disc label-side up
over the tray spindle.

NOTE:

If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.

Gently press the disc

(3)

down onto the tray spindle until the disc snaps into place.

Close the disc tray.

If you have not yet configured AutoPlay, as described in the following section, an AutoPlay dialog box
opens. It prompts you to select how you want to use the media content.

NOTE:

For best results, be sure that your AC adapter is plugged into an external power source while

playing a BD.

Configuring AutoPlay

Select

Start

Control Panel

Play CDs or other media automatically

Confirm that the

Use AutoPlay for all media and devices

check box is selected.

Chapter 4 Multimedia

Содержание ProBook 4325s - Notebook PC





































































































































































































Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы:

HP ProBook 4325s - Notebook PC, Руководство пользователя, Страница: 72 / 196

Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы: