HP ProBook 4325s - Notebook PC Скачать руководство пользователя страница 183

Страница: 183 / 196

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:

●

To set a new boot order that the computer uses each time it is turned on, by changing the boot
order in Computer Setup.

●

To dynamically choose the boot device, by pressing

esc

while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen, and then pressing

to enter the Boot

Device Options menu.

●

To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
each time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on
or restarted, follow these steps:

Turn on or restart the computer, and then press

esc

while the “Press the ESC key for Startup Menu”

message is displayed at the bottom of the screen.

Press

f10

to enter BIOS Setup.

Use a pointing device or the arrow keys to select the Legacy Boot Order list, and then press

enter

To move the device up in the boot order, use a pointing device to click the up arrow or press the

key.

– or –

To move the device down in the boot order, click the down arrow or press the

key.

To save your changes and exit Computer Setup, click the

Save

icon in the lower-left corner of the

screen, and then follow the on-screen instructions.

– or –

Use the arrow keys to select

File

Save Changes and Exit

, and then press

enter

Your changes go into effect when the computer restarts.

Dynamically choosing a boot device using the F9 prompt

To dynamically choose a boot device for the current startup sequence, follow these steps:

Turn on or restart the computer, press

esc

while the “Press the ESC key for Startup Menu” message

is displayed at the bottom of the screen.

Open the Boot Device Options menu, by pressing

Use a pointing device or the arrow keys to select a boot device, and then press

enter

Your changes go into effect immediately.

Choosing MultiBoot preferences 171

Содержание ProBook 4325s - Notebook PC





































































































































































































Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы:

Похожие инструкции для ProBook 4325s - Notebook PC

Бренды по названию

Популярные бренды

HP ProBook 4325s - Notebook PC, Руководство пользователя

Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы:

Похожие инструкции для ProBook 4325s - Notebook PC

Бренды по названию

Популярные бренды