HP ProBook 4325s - Notebook PC Скачать руководство пользователя страница 135

Страница: 135 / 196

Grasp the edge of the memory module

(2)

, and gently pull the module out of the memory

module slot.

To protect a memory module after removal, place it in an electrostatic-safe container.

14.

Insert a new memory module:

CAUTION:

To prevent damage to the memory module, hold the memory module by the edges

only. Do not touch the components on the memory module.

Align the notched edge

(1)

of the memory module with the tab in the memory module slot.

With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module

(2)

into the memory module slot until it is seated.

CAUTION:

To prevent damage to the memory module, do not bend the memory module.

Adding or replacing memory modules 123

Содержание ProBook 4325s - Notebook PC





































































































































































































Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы:

HP ProBook 4325s - Notebook PC, Руководство пользователя, Страница: 135 / 196

Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы: