HP ProBook 4325s - Notebook PC Скачать руководство пользователя страница 120

Страница: 120 / 196

CAUTION:

To prevent damage to a USB connector, do not pull on the cable to remove the USB device.

To remove a USB device:

Click the

Safely Remove Hardware and Eject Media

icon in the notification area, at the far right

of the taskbar.

NOTE:

To display the Safely Remove Hardware and Eject Media icon, click the

Show hidden

icons

icon (the arrow at the left side of the notification area).

Click the name of the device in the list.

You are prompted that it is safe to remove the device.

Remove the device.

Using USB legacy support

USB legacy support (enabled by default) permits the following actions:

●

Using a USB keyboard, mouse, or hub connected to a USB port on the computer during startup or
in an MS-DOS-based program or utility

●

Starting or restarting from an optional external MultiBay or an optional USB bootable device

USB legacy support is enabled at the factory. To disable or enable USB legacy support:

Open Computer Setup by turning on or restarting the computer, and then pressing

f10

while the

“F10 = ROM Based Setup” message is displayed in the lower-left corner of the screen.

Use the arrow keys to select

System Configuration

Device configurations

, and then press

enter

Use the arrow keys to enable or disable USB legacy support, and then press

f10

To save your preferences and exit Computer Setup, use the arrow keys to select

File

Save

Changes and Exit

. Then follow the instructions on the screen.

Your preferences go into effect when the computer restarts.

108 Chapter 7 External devices

Содержание ProBook 4325s - Notebook PC





































































































































































































Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы:

Похожие инструкции для ProBook 4325s - Notebook PC

Бренды по названию

Популярные бренды

HP ProBook 4325s - Notebook PC, Руководство пользователя

Результаты поиска

Содержание ProBook 4325s - Notebook PC

Отзывы:

Похожие инструкции для ProBook 4325s - Notebook PC

Бренды по названию

Популярные бренды