78
lacp period short
Use
lacp period short
to set the LACP timeout interval to the short timeout interval (1 second) on a port.
Use
undo lacp period
to restore the default.
Syntax
lacp period short
undo lacp period
Default
The LACP timeout interval is the long timeout interval (30 seconds).
Views
Ethernet interface view
Default command level
2: System level
Examples
# Set the LACP timeout interval to the short timeout interval (1 second) on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] lacp period short
lacp system-priority
Use
lacp
system
-
priority
to set the LACP priority of the local system.
Use
undo
lacp
system-priority
to restore the default.
Syntax
lacp
system-priority
system-priority
undo
lacp
system-priority
Default
The system LACP priority is 32768.
Views
System view
Default command level
2: System level
Parameters
system-priority
: Specifies the LACP priority of the local system, in the range of 0 to 65535. The smaller the
value, the higher the system LACP priority.
Examples
# Set the system LACP priority to 64.
<<Sysname> system-view
[Sysname] lacp system-priority 64
