manualshive.com logo in svg

HP photosmart 850, Справочник по командам

Поделиться
Скачать
HP photosmart 850 Скачать руководство пользователя страница 9

4 

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters. 

Usage guidelines 

If no interface type is specified, this command displays information about all interfaces. 
If an interface type is specified but no interface number is specified, this command displays information 

about all interfaces of the specified type. 

Examples 

# Display detailed information about Layer 2 interface Ten-GigabitEthernet 1/0/1.  

<Sysname> display interface ten-gigabitethernet 1/0/1 

Ten-GigabitEthernet1/0/1 current state: UP                                      

 IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e212-ff01          

 Description: Ten-GigabitEthernet1/0/1 Interface                                 

 Loopback is not set                                                             

 Media type is optical fiber, promiscuous mode set                               

 10Gbps-speed mode, full-duplex mode                                             

 Link speed type is autonegotiation, link duplex type is autonegotiation         

 Flow-control is not enabled                                                     

 The Maximum Frame Length is 4096                                                

 Broadcast MAX-ratio: 100%                                                       

 Unicast MAX-ratio: 100%                                                         

 Multicast MAX-ratio: 100%                                                       

 Allow jumbo frame to pass                                                       

 PVID: 1                                                                         

 Port link-type: access                                                          

  Tagged   VLAN ID : none                                                        

  Untagged VLAN ID : 1                                                           

 Port priority: 0                                                                

 Last clearing of counters:  Never                                               

 Last 300 seconds input:  0 packets/sec 24 bytes/sec 0%                          

 Last 300 seconds output:  0 packets/sec 0 bytes/sec 0%                          

 Input (total):  1549 packets, 106836 bytes                                      

          0 unicasts, 1472 broadcasts, 77 multicasts, 0 pauses                   

 Input (normal):  1549 packets, 106836 bytes                                     

          0 unicasts, 1472 broadcasts, 77 multicasts, 0 pauses                   

 Input:  0 input errors, 0 runts, 0 giants, - throttles                          

          0 CRC, - frame, 0 overruns, - aborts                                   

          - ignored, - parity errors                                             

 Output (total): 0 packets, 0 bytes                                              

          0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses                       

 Output (normal): 0 packets, 0 bytes                                             

          0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses                       

 Output: 0 output errors, 0 underruns, - buffer failures                         

          - aborts, 0 deferred, 0 collisions, 0 late collisions                  

          - lost carrier, - no carrier                                           

Содержание photosmart 850









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды