Fingerprint reader board
Description
Spare part number
Fingerprint reader board (includes cable)
480476-001
Before removing the fingerprint reader board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
Battery on page 51
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 56
)
b.
Optical drive (see
Optical drive on page 54
)
c.
Switch cover (see
Switch cover on page 66
)
d.
Keyboard (see
Keyboard on page 68
)
e.
Speaker assembly (see
Speaker assembly on page 72
)
f.
Display assembly (see
Display assembly on page 73
)
g.
Top cover (see
Top cover on page 82
)
Remove the fingerprint reader board:
1.
Turn the top cover upside down, with the front toward you.
2.
Remove the two Phillips PM2.0×3.0 broad-head screws
(1)
that secure the fingerprint reader board
to the top cover.
Component replacement procedures
85
Содержание Pavilion dv7-1100 - Entertainment Notebook PC
