Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
320-GB, 5400-rpm
480456-001
250-GB, 5400-rpm
480455-001
160-GB, 7200-rpm
480454-001
160-GB, 5400-rpm
480453-001
120-GB, 5400-rpm
480452-001
Hard Drive Hardware Kit (includes bracket and screws)
480457-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 51
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the six Phillips PM2.5×6.0 captive screws
(1)
that secure the accessory cover to the
computer.
3.
Lift the rear edge of the accessory cover
(2)
, swing it up and forward, and then remove the
cover
(3)
. The accessory cover is included in the Plastics Kit, spare part number 480467-001.
4.
Remove the three Phillips PM2.5×4.0 screws
(1)
that secure each hard drive to the computer.
56
Chapter 4 Removal and replacement procedures
Содержание Pavilion dv7-1100 - Entertainment Notebook PC
