![background image](http://html1.mh-extra.com/html/universal-remote-control/clikr-5-ur5l-8700l/clikr-5-ur5l-8700l_operating-instructions_1058954001.webp)
Set-up Code Tables
6
SCIENTIFIC ATLANTA 001 003 041 042 045 046
PIONEER
001 103 034 051 063 076 105
PACE
001 005 002
SAMSUNG
001 030
MOTOROLA
002 111 148
DIGEO
153
GENERAL INSTRUMENT 005 103 104
HAMLIN
049 050 055
HITACHI
103 055
JERROLD
005 004 103 005 003 008 009 010 069
MAGNAVOX
010 012
MEMOREX
052
MOXI
111 252 153
NFUSION
192
PANASONIC
044 047
PHILIPS
006 012 013 020 085
PULSAR
052
RCA
047
REGAL
049 050
REGENCY
057
SKY
230 204
SONY
108
SPRUCER
047
TELNET
354
TOCOM
039 040 056
TOSHIBA
052
VIEWSTAR
012 015
ZENITH
052 060 093 100
A MARK 112 143
ABEX
025
ACCURIAN
036
ADMIRAL 072 251 333
ADVENT
247 388
ADVENTURA
002
AIKO
103
AKAI
116 146 248 404 405 473 475 323 387 391
ALBATRON
017
ALERON
028
AMERICA ACTION
043
AMPRO 073
AMSTRAD 052
ANAM 043 054 056 080 112
AOC
116 363 112 058
APEX
572
APEX DIGITAL
006
AQUAVISION
573 574
ASTAR
477
AUDIOVOX
076 454 388
AVENTURA
052
AVION
441
AXION
039
BELCOR
116
BELL&HOWELL
333 072
BENQ
423 600
BOXLIGHT
266
BRADFORD
043
BROCKWOOD
116
BROKSONIC
238
BYDESIGN
031 032
CANDLE 116 002 003 363
CAPEHART 058
CARY AUDIO DESIGN 266
CELEBRITY
001
CENTURION
116
CETRONIC 043
CHANGHONG
247
CITIZEN
116 002 003 363 043 258 103 143
CLARION
043
CLASSIC 043
CLP CLASSIC
333
COLORTYME
116
CONCERTO 363
CONCIERGE
073
CONTEC 043 050 051
CORNEA
116
CORONADO 143
CRAIG
043 054
CROSLEY
164
CROWN 043 143
CURTIS MATHES
116 258 363 143
CXC
043
CYBERHOME
015
DAEWOO 363 016 043 044 076 103 114 125 127 143
DAYTRON 363 143
DELL
320 164 363
DIGITAL PROJECTION 570
DIMENSIA
333
DREAMVISION
235
DUKANE
011 025
DUMONT
116 073
DURABRAND
096 052
DWIN 257
DYNASTY 043
DYNEX
400
EIKI
187
ELECTROBAND
001
ELECTROGRAPH
466
ELECTROHOME
143 024 076 196
ELEKTRA
072
ELEMENT
363 494 526
EMERSON
028 048 043 155 005 116 363 047 050 051
076 096 143 153 154 052 514
ENVISION
116
EPSON
324 590
ESA
323
FISHER 007 057
FUJITSU
246 198 410
FUNAI
028 043 052
FUTURETECH 043
GATEWAY
242 268
GE
073 116 008 009 034 056 074 155 333 363
GEM
391
GIBRALTER
116 073
GO VIDEO
026
GOLDSTAR 113 116 102 363 106 112 127 143
GRUNPY
028 043
HAIER
363 501
HALL MARK 363
HANNSPREE
349 381
HARLEY DAVIDSON 028
HARVARD
043
HAVERMY
081
HELLO KITTY
076
HIMITSU
043
HISENSE
419 442
HITACHI
011 166 009 010 012 023 075 143 158 072
363 250 587
HP
378 316 327 421
HUMAX
518
HYUNDAI
337 338
ILO
472 399
INFINITY 164
INFOCUS
333 230 547 548 470 532 564 595
INITIAL
035 282
INSIGNIA
350 400 052 164 403 454 457
INTEQ
073
JANEIL
002
JBL
164
JCB
001
JCPENNEY 024 116 008 009 030 065 258 143 333 363
JENSEN 013
JVC
038 034 001 083 199 210 533 581
KAWASHO
116 001
KEC
043
KENWOOD 116 001
KLEGG
466
KLOSS
002 059
KMC
143
KNOLL SYSTEMS
230
KONKA
457
KREISEN
530
KTV
043 116 143 154
KURAZAI
072
LG
363 113 116 102 106 112 127 143 569 284
LITEON
268
LODGENET 072
LOEWE
164
LOGIK
072
LUXMAN 363
LXI
166 007 138 052 251 333 164
MAGNAVOX
164 059 116 003 060 061 363 127 022 333
094 226 390 467 431
MAJESTIC
333 072
MARANTZ 116 164 281 562 584
MATSUI 164
MATSUSHITA
080
MAXENT
242
MEGATRON
116 011
MEMOREX 007 072 363
MGA
116 363 024 028 042
MIDLAND
333 073
MINTEK
362
MINUTZ
008
MISAKAI
052
MITSUBISHI 124 109 024 028 040 042 146 363 348 450
MONIVISION
017
MONTGOMERY WARD 333 072
MOTOROLA
081
MTC
116 363 258
MULTITECH
043
NAD
138 025
NEC
272 197134 116 040 016 024 056 019 262 236
281 575
NET TV
242
NIKEI
043
NIKKO
116
NIKO
527
NORCENT
390
NORWOOD MICRO 027
NTC
103
NUVISION
351 567
OLEVIA
432 363 333
ONKING 043
ONWA 043
OPTIMUS
025
OPTOMA
265 249
OPTONICA 019 251
ORION
096
PANASONIC 080 034 056 164 208 359 552 524
PHILCO 116 003 059 060 164 363 024 056
PHILIPS
164 005 093 038 116 003 363 059 127 206
431 333 161 594
PILOT
116
Manufacturer/Brand
Set-Up Code Number
TV
Manufacturer/Brand
Set-Up Code Number
CBL-CABLE Converters
Manufacturer/Brand
Set-Up Code Number
TV
Manufacturer/Brand
Set-Up Code Number
TV
STEP2
Press the [COMPONENT] button (TV,
VCR, DVD or AUX) to be programmed
and [OK/SEL] button simultaneously for
3 seconds. The Component LED light will
turn on for 30 seconds indicating the
unit is ready to be programmed.
STEP3
Point the remote control toward the
Component and enter the 3-digit code
number assigned to your brand.
*Note :
If the 3-digit code number you just
entered is correct, the Component will
turn Off. If it did not turn Off, continue
entering code numbers listed for that
brand until the Component turns Off.
STEP4
After you’ve entered the correct code
number and the Component has turned
Off, press the [POWER] button to turn the
Component back On. Now it is time to
test the VOLUME and MUTE buttons for
the TV (or PLAY and STOP buttons for
VCR and DVD) to make sure they all work.
If any of the functions do not work as they
should, repeat from STEP 3 using the next
3-digit code number listed for that brand
until you find the best Component code.
STEP5
Once you have found the correct 3-digit
code, save it by pressing the same
[COMPONENT] button one more time.
The Component LED light will blink
twice to confirm that the code was
successfully stored.
Now, program the rest of your Components
by repeating STEPS 1-5.
*Note :
If the Pre-Programmed Method did not
work, or if the Code Tables do not list
your Component brand, use the Auto-
Search Method as explained in Section B.
B. Auto-Search Method
STEP1
Turn on the Component you want to
program (TV, VCR, DVD or AUX).
STEP2
Press the [COMPONENT] button (TV,
VCR, DVD or AUX) to be programmed
and [OK/SEL] button simultaneously for
3 seconds. The Component LED light
will turn on for 30 seconds indicating
the unit is ready to be programmed.
STEP3
Point the remote toward the Component
and press the [CH
] or [CH
] button one
step at a time or keep it pressed. The
remote will emit a series of ON/OFF com-
mands. Release the [CH
] or [CH
] but-
ton as soon as the Component turns Off.
STEP4
Test functions. (Same as for 3-Digit Code
Programming Method - Section A). If any
of the functions do not work as they
should, repeat from STEP 3 using [CH
]
or [CH
] buttons to find the correct code.
STEP5
Save the code. (Same as for 3-Digit Code
Programming Method - Section A).
Now, repeat the Auto-Search Method for those
Components you could not program earlier
with the Pre-Programmed Method.If you can’t
find the right code using the Auto-Search
Method, try the Learning Method in Section C.
C. The Learning Method
STEP1
Press the [COMPONENT] button
(TV,VCR,DVD or AUX) to be pro-
grammed and the [ASPECT] buttons
simultaneously for 3 seconds until the
Component LED light turns on.
STEP2
Line up the
CLIKR
TM
-5
to the other remote,
head-to-head, 1 or 2 inches apart.
STEP3
Press any button on the
CLIKR
TM
-5
that
you want to teach a command to. For
example, if you want to teach the
[MUTE] button, press the [MUTE] but-
ton.
STEP4
Press and hold the [MUTE] button on
the other remote until the
CLIKR
TM
-5
Component LED light blinks twice.
*Note :
The LED will blink 5 times if there
was an error in the learning
process. In so, repeat STEPS 3 and
4. Continue learning other buttons
by repeating STEPS 3 and 4.
STEP5
Once you have completed teaching
CLIKR
TM
-5
all desired commands for that
Component, save the learned commands
by pressing the [COMPONENT] and
[ASPECT] buttons simultaneously until
the Component LED blinks 3 times. Now
test all the buttons to make sure they
learned correctly.
D. Erasing a Single Learned Command
STEP1
Press the [COMPONENT] and [ASPECT]
buttons simultaneously for 3 seconds
until the Component LED light turns on.
STEP2
Press and hold the button you want to
erase for 3 seconds. The Component LED
will blink twice to confirm the erasure.
STEP3
To exit, press and hold both the [COM-
PONENT] and [ASPECT] buttons simul-
taneously until the Component LED
blinks 3 times.
E. Erasing All Learned Commands
from One Component
STEP1
Press the [COMPONENT] and [ASPECT]
buttons simultaneously for 3 seconds
until the Component LED light turns on.
STEP2
Press and hold both the [COMPONENT]
button you want to erase and the
[PAUSE] button for 5 seconds. The
Component LED will blink twice to con-
firm the erasure.
H. Programming the System On/Off Button
This allows you to program the System On/Off
button so it can send up to five power On/Off
commands with one button press.
STEP1
Press the [CBL] button.
STEP2
Press the [SYSTEM ON/OFF] button and
the [OK/SEL] button simultaneously for 3
seconds. The [CBL] button will turn on for
30 seconds.
STEP3
Press the first [COMPONENT] button you want
to store in the [SYSTEM ON/OFF] button and
then the [POWER] button. Repeat this for other
Components until you have stored all the
desired power commands into the [SYSTEM
ON/OFF] button.
STEP4
Press the [CH
] button to save the
power commands you stored. The [CBL]
button will blink twice to confirm the
commands have been saved.
I. Programming Channel Control
You can program the channel controls (Channel
Up, Channel Down, Last and Numbers) from one
Component to operate in another Component
mode. Default channel control settings on the
remote control are as follows:
CBL
: CBL
T V
: CBL
VCR
: CBL
DVD
: DVD
AUX
: AUX
If you wish to store the TV channel control in TV
mode, use the following steps.
STEP1
Press the [TV] button and the [OK/SEL]
button simultaneously for 3 seconds.
The [TV] Component LED will turn on for
30 seconds.
STEP2
Press the [VOL
] button.
STEP3
Press the [TV] button again.
The Component LED will blink twice to
confirm the programming.
To return to original state:
If you wish to restore the CABLE channel con-
trol in TV mode, repeat the above steps but
press [CBL] in
STEP3 .
J. Programming Volume Control
Volume and Mute control are factory-programmed to
automatically transfer to the respective Component
mode you select, as follows:
CBL
: CBL
T V
: TV
VCR
: TV
DVD
: TV
AUX
: AUX
However, you can program the volume controls
(Volume Up, Volume Down and Mute) from one
Component to operate in another Component.
If you wish to store the TV volume control in CBL
mode, use the following steps.
STEP1
Press the [CBL] button and the [OK/SEL] but-
ton simultaneously for 3 seconds. The [CBL]
Component LED will turn on for 30 seconds.
STEP2
Press the [VOL
] button.
STEP3
Press the [TV] button.
The Component LED will blink twice to
confirm the programming.
To return to original state:
If you wish to restore the CBL volume control in CBL
mode, repeat the above steps but press [CBL] in
STEP3
.
K. Programming a ‘Macro’ button.
If your remote model has custom-programmable Macro
buttons available, they can be programmed to act as a
'Macro' or Favorite Channel button in CABLE mode. This
allows you to program up to five 2-digit channels, four 3-
digit channels or three 4-digit channels that can be
accessed with one button press.
STEP1
Press the [CBL] button to select the CBL mode.
STEP2
Press the [MACRO] button and [OK/SEL]
button simultaneously for 3 seconds. The
[CBL] button will turn on for 30 seconds.
STEP3
Enter the the 2, 3 or 4-digit code for the channel
you want programmed first (for example, 007)
using the Number Pad, then press the [STOP]
button. Then enter the code for the next chan-
nel (for example, 050), then press the [STOP]
button. Repeat this process for the third chan-
nel. The [CBL] button will blink once for each
channel entered.
STEP4
Press the [CH
] button to store the channels
that were selected. The [CBL] button will blink
twice to confirm the storage of commands.
To access the programmed channels, press the
[MACRO] button once. This will bring up the
first channel. Press once again and it will bring
up the second channel. Press again and it will
bring up the third channel.
L. Low Battery Warning
When the batteries are low and need to be replaced
with fresh batteries, the Component LED lights will
blink 2 times in sequence whenever a [POWER] but-
ton is pressed to turn on equipment.
M. Memory Lock System
This remote control is designed to retain pro-
grammed memory for 10 years even after batteries
are removed from the remote control.
N. Record Your Component Set-up Codes
TV
Set-up Code Number:
VCR
Set-up Code Number:
DVD
Set-up Code Number:
AUX
Set-up Code Number:
For additional information about your remote
control, go to www.universalremote.com
STEP3
To exit, press and hold both the [COMPONENT]
and [ASPECT] buttons simultaneously until the
Component LED blinks 3 times.
F. Finding a Component Button’s
Setup Code Number
If you used either the Auto-Search or Learning
Methods to program a Component, you may not
know what the correct code number is. Here is a
way for you to identify the code number, so you
can record it for future reference.
STEP1
Press the [COMPONENT] button (TV,
VCR, DVD or AUX) you want to verify and
the [OK/SEL] button simultaneously for 3
seconds. The Component LED light will
turn on for 30 seconds.
STEP2
Press the [INFO] button and count the num-
ber of times the Component LED light blinks.
This number indicates the first digit of the
code, followed by the second and third,
each separated by a one second pause
when the LED will turn off.
*Note :
10 blinks represents the number zero.
Example :
One blink, (pause), eight blinks,
(pause) and three blinks, indicates
code number 183.
G. AUX Function: Programming a 5
th
Component
You can take advantage of the AUX function to
program a 5
th
Component such as a second TV,
VCR, DVD or Audio Component.
STEP1
Turn on the 5
th
Component you want to
program (TV, VCR, DVD or Audio).
STEP2
Press the [AUX] button and the
[OK/SEL] button simultaneously for 3
seconds.The [AUX] Component LED will
turn on for 30 seconds.
STEP3
Press the [COMPONENT] button you
want to setup. Point the remote control
toward the Component and enter the 3-
digit code number assigned to your
brand.
*Note :
If the 3-digit code number you just
entered is the correct number, the
Component will turn Off. If it did not
turn Off, continue entering code num-
bers listed for that brand until the
Component turns Off.
STEP4
Test functions. (Same as for 3-Digit Code
Programming Method - Section A). If any
of the functions do not work as they should,
you need to find a new code.
STEP5
Once you have found the correct 3-digit
code, save it by pressing the [AUX] button
one more time. The Component LED light
will blink twice to confirm the code was
stored. Now when you press the AUX
button, all the buttons will work with that
5
th
Component.
Button Functions
4
There are two ways you can program your
CLIKR
TM
-5
remote:
* The Pre-Programmed 3-Digit Code Method
* The Auto-Search Method
* The Learning Method
The Pre-Programmed Code Method allows you to setup all the buttons at once by entering 3-digit
code numbers that correspond to a particular Component’s manufacturer/brand, so it’s the fastest
and easiest of the two methods. (Code Tables are on the backside of this Instruction Sheet.) The
Auto-Search Method scans through all the codes in the remote control, one at a time. The
Learning Method allows you to transfer functions from other remotes, one button at a time.
IMPORTANT SETUP NOTE!
This pertains to all programming steps. When you are in setup mode, a component LED will light
for 30 seconds.If you do not press a button within 30 seconds, the LED light will turn off and exit
setup mode and you will need to start over.
A. Pre-Programmed 3-Digit Code Method
STEP1
Turn on the Component you want to program (TV, VCR, DVD or AUX).
Universal Remote Control, Inc.
www.universalremote.com
OCE-0060E REV 07 (02/26/10)
UR5L-8700L & UR5L-8720L
Operating Instructions For
CLIKR
™
-5
Cable Remote Control
The
CLIKR
TM
-5
UR5L-8700L & UR5L-8720L
are designed to operate the Scientific-
Atlanta, Pioneer, Pace Micro, Samsung and
Motorola digital set tops, plus the majority
of TV, VCR, DVD and AUDIO equipment on
the market as shown below.
CABLE
: Cable Converters
TV
: Televisions
VCR
: VCRs and TV/VCRs
DVD
: DVD Players
AUX
: Audio Receivers and DVRs, etc.
Introduction
1
DEFAULT STATE:
Component Default:
CABLE Set Top Box (STB)
Channel Default:
CABLE channel and numbers
through the CABLE STB. You have the option of
controlling your CABLE channel and numbers
through the TV or VCR. Refer to section
I
for
programming steps.
Volume Default:
Volume and Mute control are
automatically transferred to the respective
Component mode you select, as follows: CBL:
Cable Set Top Box / TV: TV / AUX: AUX. Volume
and Mute control for VCR and DVD are auto-
matically transferred to the TV. However, you
have the option of controlling CABLE Volume
and Mute through the TV, VCR or AUX. Refer to
section
J
for programming steps.
Operations
3
Replacing Batteries
2
Before you program or operate the remote
control, you must install two new AA alkaline
batteries.
STEP1
Remove the battery compartment cover
on the back of your remote control.
STEP2
Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3
Replace the battery compartment cover.
Programming the Remote Control
5