![background image](http://html.mh-extra.com/html/hp/jetdirect-640n/jetdirect-640n_administrators-manual_163697088.webp)
Config Precedence tab
Specify the order of precedence of the print server configuration methods. For example, to ensure
that IPv4 parameters configured by a TFTP server cannot be overwritten by a manual configuration
method (such as the printer control panel, Telnet, or the HP Embedded Web Server), you can
indicate that TFTP takes precedence over manual configuration.
The factory-default precedence order is indicated in the following table.
Table 4-8
TCP/IP Config Precedence tab
Item
Description
Configuration Methods
Precedence of the configuration methods. The default precedence order is shown,
where manual configuration has the highest priority. To change the order of the list,
select an entry and use the up or down arrows to move it.
Manual
Use the printer control panel, Telnet, HP Embedded Web Server, installation
and management software.
TFTP
Use a TFTP file from a TFTP server, typically identified during a BootP/DHCP
configuration.
DHCP/Bootp
Use a BootP or DHCPv4 server.
DHCPv6
Use a DHCPv6 server.
Default
: Factory default configuration.
Reset to default scheme
Reset the precedence table to the default sequence.
Reinitialize Now
Save the new precedence table, clear the configuration method to its factory-default
setting, and restart the IP stack.
Clear Previous Values and
Reinitialize Now
Save the new precedence table, clear the configuration method to its factory-default
setting, clear current TCP/IP parameter settings, and restart the IP stack.
Apply
Cancel
Click
Apply
to save the changes to the
Configuration Methods
precedence table.
Depending on the changes made, you might need to turn the print server Off/On to
implement.
Click
Cancel
to cancel your changes to the precedence table.
CAUTION:
Clicking
Cancel
does not reverse changes made by the
Reinitialize
Now
or
Clear Previous Values and Reinitialize Now
buttons.
Example
: To set all parameters configured through DHCP to Read-only, and allow manual
configuration only of parameters that are not configured through DHCP, use the following steps:
1.
Turn on the print server so that it obtains its DHCP configuration.
2.
Change the precedence table to the following:
78
Chapter 4 HP Embedded Web Server (V.45.xx.nn.xx)
ENWW
Содержание Jetdirect 640n
