Table 8-2
HP Jetdirect Configuration/General Information (continued)
Message
Description
STATUS
Current state of the HP Jetdirect print server.
I/O CARD READY
, or
READY
Successfully connected to the network and is awaiting
data.
I/O CARD INITIALIZING
, or
INITIALIZING
Initializing the network protocols. For more
information, see the status line for each protocol on the configuration page.
I/O CARD NOT READY
, or
ERROR
Problem detected with the print server or its
configuration.
An error code and message is displayed if the print server is not ready. For more
information, see
Table 8-13 Error messages on page 153
.
DATA RATE DETECTED
Specifies the network data rate depending on the type of network connection:
1–54 Mbps (Wireless 802.11bgn)
10 Mbs, 100 Mbps, 1000 Mbps (Wired Ethernet)
MODEL NUMBER
Product number of the HP Jetdirect print server (for example, J7961G)
LINK CONFIG
Specifies the active link communication mode:
802.11: Wireless 802.11bgn
10T HALF: 10 Mbps, half-duplex (wired port)
10T FULL: 10 Mbps, full-duplex (wired port)
100TX HALF: 100Mbps, half-duplex (wired port)
100TX FULL: 100Mbps, full-duplex (wired port)
HARDWARE ADDRESS
The 12-digit hexadecimal network hardware (MAC) address of the HP Jetdirect print
server installed in the printer or device. This address is assigned by the manufacturer.
PORT SELECT
(Ethernet only) Specifies the port detected for use on the HP Jetdirect print server:
NONE: The print server is not connected to the network.
RJ-45: The RJ-45 network port is connected.
FIRMWARE VERSION
Firmware revision number of the HP Jetdirect print server currently installed in the
printer.
LAA
Locally administered address (LAA) identifies the specified LAN hardware address of
a print server, which is required by some network adiministrators. The default address
is the print server's factory-default LAN hardware address.
MANUFACTURING ID
Manufacturing identification code for use by HP online support personnel.
S/N
HP Jetdirect serial number.
DATE MANUFACTURED
Manufacture date of the HP Jetdirect print server.
802.11 Wireless station settings
Wireless station status, configuration parameters and error messages are listed in
Table 8-3 802.11
Wireless station settings on page 143
.
142 Chapter 8 HP Jetdirect configuration pages
ENWW
Содержание Jetdirect 640n
