HP Jetdirect 640n, Руководство администратора

Страница: 156 / 228

Table 8-4 Security Settings (continued)
Message Description
Access List (IPv4 only) Access control list is set on the HP Jetdirect print server. The list specifies
the IP address of individual systems, or IP network of systems, that are allowed
access to the print server and device.
Specified Host access list is set.
Not Specified Host access list is not set. All systems are allowed access.
Secure Web Configuration Use encrypted communications between a browser and the HP Embedded Web
Server.
Optional (HTTPS/HTTP) Allows un-encrypted communication using standard HTTP
ports, as well as encrypted communications using HTTPS.
HTTPS Required Allow only encrypted communications on HTTPS.
Assessment When enabled (the default), print servers attempting connection to network resources
must be in full compliance with corporate governance policy.
Assessment State Indicates whether assessment is Enabled or Disabled.
DHCP Enforcement Use DHCP as the transport method for moving assessment data.
802.1X Enforcement Use 802.1X to transport assessment data.
Policy Changes Poll Interval Number of days to wait before checking the assessment server for changes.
JD Config Changes Poll Interval Number of hours to wait before checking the assessment server for device
configuration changes.
Primary Address/Host Name IP address or host name of the primary assessment server.
Primary Port Port number of the primary assessment server.
Backup Address/Host Name IP address or host name of the backup assessment server.
Backup Port Port number of the backup assessment server.
Network Statistics
Information in this section of the HP Jetdirect configuration page is described in Table 8-5 Network
Statistics on page 146 .
Table 8-5 Network Statistics
Message Description
TOTAL PACKETS RECEIVED Total number of frames (packets) received by the HP Jetdirect print server without
error. Includes broadcast, multicast packets, and packets specifically addressed to
the print server. Does not include packets specifically addressed to other nodes.
UNICAST PACKETS RECEIVED Number of frames specifically addressed to this HP Jetdirect print server. Does not
include broadcasts or multicasts.
BAD PACKETS RECEIVED Total number of frames (packets) received with errors by the HP Jetdirect print
server.
TOTAL PACKETS TRANSMITTED Total number of frames (packets) transmitted without error.
146 Chapter 8 HP Jetdirect configuration pages ENWW