manualshive.com logo in svg

HP Jetdirect 640n, Руководство администратора

HP Jetdirect 640n - сетевой адаптер с поддержкой IPv6 и управлением. Администратор може скачать бесплатно Руководство администратора с manualshive.com для настройки и использования устройства. Руководство доступно для загрузки в разделе "manual", обеспечивая полную информацию о продукте.

Поделиться
Скачать
background image

Table 8-13

  Error messages (continued)

Error Code and Message

Description

11 LAN ERROR - RETRY FAULTS

(Ethernet) There is a problem with your network cabling or external network
configuration. Verify operation of the hub or switch port.

12 LAN ERROR - NO LINKBEAT

Using a wired Ethernet port, this message is displayed if a link beat is not sensed.
Check the network cable, and verify that the concentrator/hub is providing a link beat.

13 NETWORK RECONFIG - MUST
REBOOT

Reset or turn the print server off and then on to enable new configuration values.

14 DISCONNECTED

Novell NetWare protocol is disconnected. Check the server and the print server.

15 CONFIGURATION ERROR

(Ethernet) Configuration information for the NetWare functions is not stored correctly
on the print server. Use the installation software, HP Embedded Web Server, or other
tools to reconfigure the print server. If this error persists, there might be a problem
with the HP Jetdirect print server.

16 NOT CONFIGURED

(Ethernet) Print server is not configured for NetWare. Use the installation software,
HP Embedded Web Server, or other tools to configure the print server for NetWare
networks.

17 UNABLE TO FIND SERVER

(Ethernet) HP Jetdirect print server is unable to find the NetWare print server
(Remote Printer mode) or file server (Queue Server mode). (There was no response
to service queries for advertising print servers or file servers that matched the
configured print server or file server name.)

Verify that the print or file server is running and that the name configured on the
HP Jetdirect print server matches the actual name used by the print or file server.
Verify that all cables and routers are functioning correctly.

18 PASSWORD ERROR

Print server detected that the password for the NetWare print server object is
incorrect. Use a NetWare utility (such as PCONSOLE) to erase the print server object
password. A new password is set when the HP Jetdirect print server logs on again.

NOTE:

When multiple file servers are configured, the error is only displayed on the

configuration page if none of the file servers are connected.

19 NO QUEUE ASSIGNED

The HP Jetdirect print server object is not assigned any queues to service. Assign
queues to the print server object using printer installation or NetWare utilities.

NOTE:

When multiple file servers are configured, the error is displayed on the

configuration page only if none of the file servers are successfully connected.

1A PRINTER NUMBER NOT
DEFINED

A NetWare printer number for this printer has not been configured. Assign a valid
printer number to the HP Jetdirect print server. Use a NetWare utility (such as
PCONSOLE), the HP Embedded Web Server, or other tool to assign a printer
number.

1B PRINTER NUMBER IN USE

Assigned NetWare printer number is already in use by another printer. Assign an
unused printer number. Can also occur when a print server is turned off and then on.
The error clears after the print server times out and detects the lost connection.

1C PRINT SERVER NOT DEFINED

File server does not contain a print server object that corresponds to the specified
NetWare node name. Use printer installation software, a NetWare utility (such as
PCONSOLE), or another tool to create the print server object.

When the HP Jetdirect print server is configured for multiple file servers, the error is
displayed on the configuration page only if none of the file servers connected.

1D UNABLE TO CONNECT TO
SERVER

Remote printer mode error. Print server is unable to establish an SPX connection with
the NetWare print server. Verify the NetWare print server is running and that all
cables and routers are functioning correctly.

154 Chapter 8   HP Jetdirect configuration pages

ENWW

Содержание Jetdirect 640n





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Jetdirect 640n

IBM 150 User Reference Manual preview
150
Бренд: IBM Страницы: 180
QMS 4060 Supplementary Manual preview
4060
Бренд: QMS Страницы: 27
QMS 4060 Accessories Manual preview
4060
Бренд: QMS Страницы: 3
U.S. Converters XS1000 User Manual preview
XS1000
Бренд: U.S. Converters Страницы: 5
Canon RP10 User Manual preview
RP10
Бренд: Canon Страницы: 37
Oki C911dn Supplementary Manual preview
C911dn
Бренд: Oki Страницы: 44
Star Micronics TSP043E Series Hardware Manual preview
TSP043E Series
Бренд: Star Micronics Страницы: 24
Citizen CT-S310 User Manual preview
CT-S310
Бренд: Citizen Страницы: 3
Olivetti DR N17 Service Manual preview
DR N17
Бренд: Olivetti Страницы: 558
Western Digital Ultrastar Serv60+8 User Manual preview
Ultrastar Serv60+8
Бренд: Western Digital Страницы: 406
Canon PIXMA TS9550 Online Manual preview
PIXMA TS9550
Бренд: Canon Страницы: 436
Canon Pixma TS8700 Series Online Manual preview
Pixma TS8700 Series
Бренд: Canon Страницы: 589
Canon IVY CLIQ+2 User Manual preview
IVY CLIQ+2
Бренд: Canon Страницы: 34
Ice Torus 126 Getting Started Manual preview
Torus 126
Бренд: Ice Страницы: 114
Tally T9020 Maintenance Manual preview
T9020
Бренд: Tally Страницы: 54
Kraun Video Server User Manual preview
Video Server
Бренд: Kraun Страницы: 36
MINOLTA-QMS PagePro 4100 User Manual preview
PagePro 4100
Бренд: MINOLTA-QMS Страницы: 67
Thecus N3200PRO User Manual preview
N3200PRO
Бренд: Thecus Страницы: 102

Бренды по названию

Популярные бренды

Загрузить еще бренды