HP Integrity NonStop i NS2300, Руководство по планированию

Страница: 62 / 81

The command interpreter input file (CIIN) is automatically invoked after the first processor is
loaded. The CIIN file shipped with new systems contains the TACL RELOAD * command, which
loads the remaining processors.
Default Naming Conventions
With a few exceptions, default naming conventions are not necessary for system resources.
However, default naming conventions have been preconfigured for the following resources to
simplify initial configuration files and automatic generation of these resources.
Description Example Naming Convention
1
Type of Object
Twentieth ESS disk drive in
the system $ESS20 $ESS
number
ESS disk drive
Twentieth SAS disk volume
in the system $SAS20 $SAS
number
SAS disk enclosure
First modular tape drive in
the system $TAPE01 $TAPE
number
Modular tape drive
IP CLIM which has the X1
attachment point to the VIO N100241 N
group module slot
port
IP CLIM
enclosure located in group
100, module 2, slot 4, port
1
Telco CLIM which has the
X1 attachment point to the O100243 O
group module slot
port
Telco CLIM
VIO enclosure located in
group 100, module 2, slot 4,
port 3
Storage CLIM which has the
X1 attachment point to the S100233 S
group module slot
port
Storage CLIM
VIO enclosure located in
group 100, module 2, slot 3,
port 3
Ethernet connection in
location 100.2.7 G10027 G
group module slot
Ethernet Adapter object
Logical interface (LIF) for
PIF B in slot 7 in module 2 L10027B L
group module slot
PIF
Ethernet LIF object
of the Group 100 VIO
Enclosure
First TCP6SAM or TCP/IP
process for the system $ZTC0 $ZTC number TCP/IP process
First Telserv process for the
system $ZTN0 $ZTN number Telserv process
First Listener process for
the system LSN0 $LSN number Listener process
None None Automatically created by
WANMGR TFTP process
None None Automatically created by
WANMGR WANBOOT process
Tenth SWAN/SWAN 2
concentrator in the system S10 S
number
SWAN/SWAN 2
concentrators
62 Default Startup Characteristics and Naming Conventions