Context: Policy configuration
Syntax
[no] default-class action mirror
session
[action mirror
session
...]
Configures a default class that allows packets that are not matched nor ignored by any of the class configurations
in a mirroring policy to be mirrored to the destination configured for the specified session.
Applying a mirroring policy on a port or VLAN interface
Enter one of the following
service-policy
commands from the global configuration context.
Context: Global configuration
Syntax
interface
<PORT-LIST>
service-policy
policy-name
in
Configures the specified ports with a mirroring policy that is applied to inbound traffic on each interface.
Separate individual port numbers in a series with a comma, for example,
a1,b4,d3
. Enter a range of ports by
using a dash, for example,
a1-a5
.
The mirroring policy name you enter must be the same as the policy name you configured with the
policy
mirror
command.
Syntax
vlan
vlan-id
service-policy
policy-name
in
Configures a mirroring policy on the specified VLAN that is applied to inbound traffic on the VLAN interface.
Valid VLAN ID numbers range from 1 to 4094.
The mirroring policy name you enter must be the same as the policy name you configured with the
policy
mirror
command in the syntax
.
Viewing a classifier-based mirroring configuration
To display information about a classifier-based mirroring configuration or statistics on one or more mirroring
policies, enter one of the following commands:
Syntax
show class [ipv4
class-name
| ipv6
class-name
| config]
Syntax
show policy [
policy-name
| config]
Syntax
show policy resources
Syntax
show statistics policy [policy-name] [interface
port-num
| vlan
vid
in]
Chapter 12 Monitoring and Analyzing Switch Operation
417
