Limitations
Switch configuration restore without reboot feature does not support the following scenarios:
• Removing a physically present member through
cfg-restore
command
• Flex-module provisioning or removal on standalone or a stack
• Module provisioning or removal on standalone or a stack
• Adding a VLAN when the VLAN limit is already reached by having dynamic VLANs. Due to timing issues, ports
or dynamic VLANs take some time to become offline or be removed, even after applying a removal command.
In such a case, restore commands fail as normal CLI commands.
• The maximum number of backup configuration files has been increased from three to five. When the firmware
is downgraded to lower versions, the
show config files
command displays the details to only three
configuration files.
• Restore is allowed based on the available system resource factors.
Blocking of configuration from other sessions
All
write
operations are not allowed from other sessions (CLI/WebUI/SNMP/REST, and so on) during a
configuration restoration process. Only
read
operation is allowed. Attempts to use
write
operation results in the
Configuration restore is in progress, configuration changes are temporarily
disabled
error. The following
show
commands are blocked during a configuration restoration process:
•
show-tech
•
show config
•
show running-config
•
show startup-config
766
Aruba 2930F / 2930M Management and Configuration Guide
for ArubaOS-Switch 16.08
