21 1000SX J4858C MY050VM9WB 1990-3657
22 1000SX J4858B P834DIP2
You can specify
all
for
port-list
as shown below.
Output when “all” is specified
switch(config)# show interfaces transceiver all
No Transceiver found on interface 1
No Transceiver found on interface 2
.
.
.
No Transceiver found on interface 24
Transceiver Technical information:
Product Serial Part
Port Type Number Number Number
------- ----------- ------------ ------------------ ----------
21 1000SX J4858C MY050VM9WB 1990-3657
22 1000SX J4858B P834DIP2
Information displayed with the detail parameter
When the
show interfaces transceiver [port-list] detail
command is executed, the following
information displays.
Table 32: General transceiver information
Parameter
Description
Interface
Index
The switch interface number
Transceiver-
type
Pluggable transceiver type
Transceiver
model
Pluggable transceiver model
Connector-
type
Type of connector of the transceiver
Wavelength
For an optical transceiver: the central wavelength of the laser sent, in nm. If the transceiver
supports multiple wavelengths, the values will be separated by a comma.
Transfer
Distance
Link-length supported by the transceiver in meters. The corresponding transfer medium is
shown in brackets following the transfer distance value, For example, 50um multimode fiber. If
the transceiver supports multiple transfer media, the values are separated by a comma.
Table Continued
Chapter 13 Troubleshooting
481
