HP Apollo 2000 System, Руководство пользователя

Страница: 117 / 203

17. Install the bayonet board bracket and bayonet board assembly .
18. Route and secure the cable under the thin plastic cover.
19. Install any removed PCI riser cage assemblies. .
20. Install the node into the chassis .
21. Connect all peripheral cables to the node.
22. Power up the node .
For more information about the integrated storage controller and its features, select the relevant user
documentation on the
Hewlett Packard Enterprise website .
To configure arrays, see the HPE Smart Storage Administrator User Guide on the Hewlett Packard
Enterprise website .
Accelerator options
This hardware option might require a power supply with a higher wattage rating. To accurately estimate the
power consumption of your server and select the appropriate power supply and other system components,
see the
Hewlett Packard Enterprise Power Advisor website .
Determine if there are thermal requirements for the option. For a list of options that have thermal limitations,
see "
Thermal limitations ."
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the
Hewlett Packard Enterprise website .
Accelerator population rules
Observe the following population rules when installing an accelerator in the node:
• The FlexibleLOM 2U node riser cage assembly supports one accelerator option. Install the accelerator into
slot 2.
• A three-slot riser cage assembly supports a maximum of two accelerators.
Accelerator options 117