manualshive.com logo in svg

HP Apollo 2000 System, Руководство пользователя, Страница: 8 / 203

Поделиться
Скачать
HP Apollo 2000 System Скачать руководство пользователя страница 8

HPE Apollo 2000 System

Introduction

The HPE Apollo 2000 System consists of a chassis and nodes. There are three chassis options with different
storage configurations. To ensure proper thermal cooling, the four server tray slots on the chassis must be
populated with server nodes or node blanks.

Chassis

• HPE Apollo r2200 Chassis (12 low-profile LFF model)
• HPE Apollo r2600 Chassis (24 SFF model)
• HPE Apollo r2800 Chassis (24 SFF model with storage expander backplane)

Nodes

• HPE ProLiant XL170r Gen9 Server Node (1U)
• HPE ProLiant XL190r Gen9 Server Node (2U)

The chassis supports the combination of 1U and 2U nodes. One chassis can support a maximum of the
following:

• Four 1U nodes
• Two 1U nodes and one 2U node
• Two 2U nodes

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the 

Hewlett Packard Enterprise website 

.

8

 HPE Apollo 2000 System

Содержание Apollo 2000 System












































































































































































































Отзывы:

Нет отзывов