HP Apollo 2000 System Скачать руководство пользователя страница 186 | Manualshive

Страница: 186 / 203

background image

If you are installing an Intelligent Provisioning-supported OS, use

Intelligent Provisioning

and its Configure

and Install feature to install the OS and latest supported drivers.

If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are required.
These drivers, as well as other option drivers, ROM images, and value-add software can be downloaded as
part of an SPP.

If you are installing drivers from SPP, be sure that you are using the latest SPP version that your node
supports. To verify that your node is using the latest supported version and for more information about SPP,
see the

Hewlett Packard Enterprise website

To locate the drivers for a particular server, go to the

Hewlett Packard Enterprise Support Center website

Under

Select your HPE product

, enter the product name or number and click

Go

.

Software and firmware

Update software and firmware before using the node for the first time, unless any installed software or
components require an older version.

For system software and firmware updates, use one of the following sources:

• Download the SPP from the

Hewlett Packard Enterprise website

• Download individual drivers, firmware, or other systems software components from the node product page

Hewlett Packard Enterprise Support Center website

Operating System Version Support

For information about specific versions of a supported operating system, refer to the

operating system

support matrix

.

Version control

The VCRM and VCA are web-enabled Insight Management Agents tools that SIM uses to schedule software
update tasks to the entire enterprise.

• VCRM manages the repository for SPP. Administrators can do the following:

◦ View the SPP contents
◦ Configure VCRM to update the repository automatically with internet downloads of the latest software

and firmware from Hewlett Packard Enterprise

• VCA compares installed software versions on the server with updates available in the VCRM managed

repository. Administrators configure VCA to point to a repository managed by VCRM.

For more information about version control tools, see the following documents on the

Hewlett Packard

Enterprise website

:

• Systems Insight Manager User Guide
• Version Control Agent User Guide
• Version Control Repository Manager User Guide

To locate the documents, do the following:

1.

Select

Insight Management

from the available options in Products and Solutions.

2.

Select

Version Control

from the available options in Models / Subcategories.

3.

Locate and download the latest document.

Operating systems and virtualization software support for ProLiant servers

For information about specific versions of a supported operating system, see the

Hewlett Packard

Enterprise website

.

186

Software and firmware

«
...
184
185
186
187
188
...
»

Содержание Apollo 2000 System












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Apollo 2000 System

Бренд: Xerox Страницы: 40

Бренд: Crown Страницы: 12

NovaScale T820 F2

Бренд: Bull Страницы: 34

HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006

Бренд: IBM Страницы: 1

AirLive WP-203G

Бренд: Ovislink Страницы: 132

Transport TX46 (B4985) Service

Бренд: TYAN Страницы: 75

SUPERSERVER 6015C-NT

Бренд: Supermicro Страницы: 110

Бренд: Eneo Страницы: 94

AcquiLite EMB A7810

Бренд: Obvius Страницы: 29

Бренд: Emerson Страницы: 23

DIXELL XWEB5000 PRO

Бренд: Emerson Страницы: 20

Бренд: Emerson Страницы: 18

Avocent ACS 6000

Бренд: Emerson Страницы: 93

Бренд: Emerson Страницы: 114

Centellis 2000 Shelf Release 3.0

Бренд: Emerson Страницы: 194

Бренд: Emerson Страницы: 222

PRIMERGY CX120 S1

Бренд: Fujitsu Страницы: 82

PRIMERGY BX922 S2

Бренд: Fujitsu Страницы: 106

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды