HP Apollo 2000 System, Руководство пользователя

Страница: 112 / 203

Installing the storage controller and FBWC module options
About this task
IMPORTANT:
If planning to install a Smart Storage Battery, install it in the chassis before installing the storage
controller and FBWC module in the node .
Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis .
4. Place the node on a flat, level surface.
5. Remove the PCI riser cage .
6. Identify the PCIe slot compatible with the new option, and then remove the PCI blank opposite that slot.
7. Remove the bayonet board assembly and bayonet bracket .
8. If you intend to use an FBWC module, install the module on the storage controller. Depending on the
controller model, the cable connector on the cache module might be facing up or down when the module
is installed on the controller board.
9. If installed, remove the air scoop from the controller.
10. Open the latch on the controller.
11. Connect the cache module backup power cable to the module.
112 Installing the storage controller and FBWC module options