manualshive.com logo in svg

HP Apollo 2000 System, Руководство пользователя

Система HP Apollo 2000 - надежное и эффективное решение для вашего бизнеса. Здесь вы можете скачать бесплатно Руководство по обслуживанию и сервису, чтобы быть всегда в курсе технических особенностей продукта. Скачайте его с manualshive.com и будьте уверены в надежности вашей системы.

Поделиться
Скачать
background image

HPE Insight Remote Support central connect

When you use the embedded Remote Support functionality with ProLiant Gen8 and later server models and
BladeSystem c-Class enclosures, you can register a node or chassis to communicate to Hewlett Packard
Enterprise through an Insight Remote Support centralized Hosting Device in your local environment. All
configuration and service event information is routed through the Hosting Device. This information can be
viewed by using the local Insight Remote Support user interface or the web-based view in Insight Online.

For more information, see 

Insight Remote Support Release Notes

 on the 

Hewlett Packard Enterprise

website

.

HPE Insight Online direct connect

When you use the embedded Remote Support functionality with ProLiant Gen8 and later server models and
BladeSystem c-Class enclosures, you can register a node or chassis to communicate directly to Insight
Online without the need to set up an Insight Remote Support centralized Hosting Device in your local
environment. Insight Online will be your primary interface for remote support information.

For more information, see the product documentation on the 

Hewlett Packard Enterprise website

.

Insight Online

HPE Insight Online is a capability of the Support Center portal. Combined with Insight Remote Support central
connect or Insight Online direct connect, it automatically aggregates device health, asset, and support
information with contract and warranty information, and then secures it in a single, personalized dashboard
that is viewable from anywhere at any time. The dashboard organizes your IT and service data to help you
understand and respond to that information more quickly. With specific authorization from you, an authorized
Channel Partner can also view your IT environment remotely using Insight Online.

For more information about using Insight Online, see

 Insight Online User’s Guide

 on the 

Hewlett Packard

Enterprise website

.

Intelligent Provisioning

Intelligent Provisioning is a single-server deployment tool embedded in ProLiant Gen8 and later servers.
Intelligent Provisioning simplifies ProLiant server setup and provides a reliable and consistent way to deploy
ProLiant server configurations:

• Intelligent Provisioning prepares the system for installing "off-the-shelf" and Hewlett Packard Enterprise

branded versions of operating system software and integrates optimized ProLiant server support software.

• Intelligent Provisioning provides installation help for Microsoft Windows, Red Hat and SUSE Linux, and

VMware operating systems. For specific OS support, see the 

Intelligent Provisioning Release Notes

 on the 

Hewlett Packard Enterprise website

.

• Intelligent Provisioning provides maintenance-related tasks using the Perform Maintenance window.

For more information about Intelligent Provisioning software and recovery media downloads, see the 

Hewlett

Packard Enterprise website

. For consolidated drive and firmware update packages, see the Smart Update:

Server Firmware and Driver Updates page on the 

Hewlett Packard Enterprise website

.

Insight Diagnostics

The Insight Diagnostics is a proactive node management tool, available in both offline and online versions.
The tool provides diagnostics and troubleshooting capabilities to assist IT administrators who verify node
installations, troubleshoot problems, and perform repair validation.

The Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS
is not running. To run this utility, boot the node using Intelligent Provisioning.

HPE Insight Remote Support central connect

177

Содержание Apollo 2000 System












































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Apollo 2000 System

Lanner LEC-3010 User Manual preview
LEC-3010
Бренд: Lanner Страницы: 43
Vxl Itona DxxS User Manual preview
Itona DxxS
Бренд: Vxl Страницы: 19
Leightronix UltraNEXUS HD Blade Product Quick Manual preview
UltraNEXUS HD Blade
Бренд: Leightronix Страницы: 5
Huawei XH628 V5 Quick Start Manual preview
XH628 V5
Бренд: Huawei Страницы: 2
Huawei X6800 Technical Manual preview
X6800
Бренд: Huawei Страницы: 52
Huawei V100R002C01 User Manual preview
V100R002C01
Бренд: Huawei Страницы: 122
Huawei U-SYS MRS6100 Technical Manual preview
U-SYS MRS6100
Бренд: Huawei Страницы: 131
Huawei UPS5000-E-****-FM series User Manual preview
UPS5000-E-****-FM series
Бренд: Huawei Страницы: 261
Siemens Server Installation, Operation And Maintenance Manual preview
Server
Бренд: Siemens Страницы: 48
Siemens SINUMERIK 840Di sl/840D sl Function Manual preview
SINUMERIK 840Di sl/840D sl
Бренд: Siemens Страницы: 250
NewTek 3Play 3P1 User Manual preview
3Play 3P1
Бренд: NewTek Страницы: 206
Habey EPC-6668 Quick Setup Manual preview
EPC-6668
Бренд: Habey Страницы: 3
Black Box Terminal Server User Manual preview
Terminal Server
Бренд: Black Box Страницы: 131
Lantronix Com Port Redirector User Manual preview
Com Port Redirector
Бренд: Lantronix Страницы: 31
Optibase MGW 2400 User Manual preview
MGW 2400
Бренд: Optibase Страницы: 156
Qbox 1200 User Manual preview
1200
Бренд: Qbox Страницы: 34
Oracle SPARC T5-2 Getting Started Manual preview
SPARC T5-2
Бренд: Oracle Страницы: 6
Oracle Exadata Storage Server X6-2 High Capacity Installation Manual preview
Exadata Storage Server X6-2 High Capacity
Бренд: Oracle Страницы: 70

Бренды по названию

Популярные бренды

Загрузить еще бренды