HP Apollo 2000 System, Руководство пользователя

Страница: 102 / 203

CAUTION:
To prevent improper cooling and thermal damage, do not operate the node unless all PCI riser
cages or rear I/O blanks are installed, and do not operate the node unless all PCI slots have
either an expansion slot cover or an expansion board installed.
IMPORTANT:
If the PCIe riser cage assembly is not seated properly, then the server does not power up.
9. Install the node into the chassis .
10. Connect all peripheral cables to the node.
11. Power up the node .
Three-slot riser cage assembly options
About this task
NOTE: A second processor is required to install a three-slot riser cage assembly.
NOTE: Three-slot riser cage assemblies feature different riser boards. For more information on the riser
board slot specifications, see " PCIe riser board slot definitions ."
Procedure
1. Power down the node .
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis .
4. Place the node on a flat, level surface.
5. Remove the 2U rear I/O blank .
6. Install the single-slot left PCI riser cage assembly and then secure it with two T-10 screws.
102 Three-slot riser cage assembly options