HP Apollo 2000 System, Руководство пользователя

Страница: 110 / 203

WARNING:
The chassis is very heavy. To reduce the risk of personal injury or damage to the equipment:
• Observe local occupational health and safety requirements and guidelines for manual material
handling.
• Remove all installed components from the chassis before installing or moving the chassis.
• Use caution and get help to lift and stabilize the chassis during installation or removal, especially
when the chassis is not fastened to the rack.
CAUTION:
Before installing the chassis into the rack or removing the chassis from the rack, Hewlett Packard
Enterprise recommends removing the nodes, the drives, and the power supplies. Because a fully
populated chassis is heavy, removing these components facilitates moving the chassis.
3. Remove all nodes from the chassis .
4. If installed, remove the security bezel .
5. Remove all drives .
6. If installed, remove the RCM module .
7. Remove all power supplies .
8. Remove the chassis from the rack .
9. Remove the access panel .
10. Remove the Smart Storage Battery holder.
11. Route the cable through the holder and install the Smart Storage Battery.
110 Hardware options installation