HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Скачать руководство пользователя страница 120

Страница: 120 / 144

120 Intelligent blades

Defining CHAP entries for iSCSI device authentication

The

modify

command can be used only for changing the authentication method for a target from None to

CHAP or CHAP to None. If nothing is specified, no authentication method is enforced. If CHAP is

specified, then either one-way or mutual CHAP enforcement will be performed based on the login frame

from host.

iscsicfg < --create | --show | --modify | --delete | --clear > auth [-u
username] [–s CHAP_Secret]

args

To modify the authentication method for a target, use the

iscsicfg --modify

command as follows:

To create CHAP users, use the

iscsicfg --create

command as follows:

Finalizing the iSCSI configuration

Use

commit

with the

iscsiCfg

command to commit the iSCSI changes to persistent memory. This option

triggers propagation of the database to all iSCSI-capable switches in the fabric and blade and commits the

changes to persistent memory.

NOTE:

Make all necessary changes to the database—virtual target creation, LUN additions, discovery

domain creation, discovery domain set creation, and so on—before using the command

iscsicfg

--commit all.

iscsicfg < --commit > all

To commit the configurations that have been created and modified, use the

iscsiCfg

command as

follows:

The

iscsicfg –commit all

command commits local configuration changes and also pushes iSCSI

configuration from a local switch to remote switches in the fabric. However, during the commit process,

other configuration changes not yet commited on remote switches need to be aborted. When configuration

changes have been made on switches in the fabric and not yet commited, the

iscsicfg –commit all

command is rejected. You need to manually abort the configuration changes on other switches in the fabric

before trying again to run the command.
To avoid this situation, use the –f option. When you do so, the

iscsicfg –commit all

command runs

and configuration changes not yet commited on remote switches in the fabric are aborted.

switch:admin> iscsicfg –-enable ddset –n myddset

Operation Succeeded

switch:admin> iscsicfg --modify tgt –t iqn.2002-10.com.company.tgt1 –a CHAP -f

Operation Succeeded

switch:admin> iscsicfg –-create auth -u username -s CHAP_Secret

Operation Succeeded

switch:admin> iscsicfg --commit all

This will commit ALL database changes made to all iSCSI switches in fabric.

This could be a long-running operation. Continue [N]:

...

The operation completed successfully

Содержание A7990A - StorageWorks SAN Director 4/16 Blade Switch

















































































































































Результаты поиска

Содержание A7990A - StorageWorks SAN Director 4/16 Blade Switch

Отзывы:

Похожие инструкции для A7990A - StorageWorks SAN Director 4/16 Blade Switch

Бренды по названию

Популярные бренды

HP A7990A - StorageWorks SAN Director 4/16 Blade Switch, Справочник по аппаратуре

Результаты поиска

Содержание A7990A - StorageWorks SAN Director 4/16 Blade Switch

Отзывы:

Похожие инструкции для A7990A - StorageWorks SAN Director 4/16 Blade Switch

Бренды по названию

Популярные бренды