HP 9124 - Cisco MDS Fabric Switch, Руководство по настройке

Страница: 907 / 1444

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
37-5
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 37 Configuring Port Security
Enabling Port Security
Step 3
Activate port security on each VSAN. This turns on auto-learning by default. See the “Activating Port
Security” section on page 37-5 .
Step 4 Disable auto-learn on each VSAN. See the “Disabling Auto-learning” section on page 37-8 .
Step 5
Copy the running configuration to the startup configuration This saves the port security configure
database to the startup configuration.
Step 6 Repeat Step 1 through Step 5 for all switches in the fabric.
Step 7
Enabling Port Security
By default, the port security feature is disabled in all switches in the Cisco MDS 9000 Family.
To enable port security, follow these steps:
Port Security Activation
This section includes the following topics:
• Activating Port Security, page 37-5
•
Database Activation Rejection, page 37-6
• Forcing Port Security Activation, page 37-6
•
Database Reactivation, page 37-7
Activating Port Security
To activate the port security feature, follow these steps:
Command Purpose
Step 1
switch# config t
Enters configuration mode.
Step 2
switch(config)#
port-security enable
Enables port security on that switch.
switch(config)# no port-security enable
Disables (default) port security on that switch.
Command Purpose
Step 1
switch# config t
switch(config)#
Enters configuration mode.