HP 9124 - Cisco MDS Fabric Switch, Руководство по настройке

Страница: 212 / 1444

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
6-16
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Using the CFS Infrastructure
CFS Regions
Managing CFS Regions
This section describes how to manage a CFS region. A set of commands are used to complete the
following tasks:
•
Creating CFS Regions, page 6-16
• Assigning Applications to CFS Regions, page 6-16
•
Moving an Application to a Different CFS Region, page 6-16
• Removing an Application from a Region, page 6-17
•
Deleting CFS Regions, page 6-17
Creating CFS Regions
To create a CFS region, follow these steps:
Assigning Applications to CFS Regions
To assign an application on a switch to a region, follow these steps:
Moving an Application to a Different CFS Region
To move an application for example, from Region 1 (originating region) with ntp and callhome
applications assigned to it, to Region 2 (target region), follow these steps:
Note If you try adding an application to the same region more than once, you see the error message,
“Application already present in the same region.”
Command Purpose
Step 1
switch# config t
switch(config)#
Enters configuration mode.
Step 2
switch(config)# cfs region 4
Creates a region, for example, number 4.
Command Purpose
Step 1
switch# config t
switch(config)#
Enters configuration mode.
Step 2
switch(config)# cfs region 4
Creates a region, for example, number 4.
Step 3
switch(config-cfs-region)# ntp
switch(config-cfs-region)# callhome
Adds application(s).
Command Purpose
Step 1
switch# config t
switch(config)#
Enters configuration mode.
Step 2
switch(config)#
cfs region 2
Enters the Region 2.
Step 3
switch(config-cfs-region)# ntp
switch(config-cfs-region)# callhome
Indicates application(s) to be moved into Region 2
that originally belong to Region 1. For example, here,
the ntp and callhome applications are moved to
Region 2.