HP 9124 - Cisco MDS Fabric Switch, Руководство по настройке

Страница: 489 / 1444

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
19-7
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 19 Configuring and Managing VSANs
VSAN Configuration
About Port VSAN Membership
Port VSAN membership on the switch is assigned on a port-by-port basis. By default each port belongs
to the default VSAN. You can assign VSAN membership to ports using one of two methods:
•
Statically—by assigning VSANs to ports.
See the “Assigning Static Port VSAN Membership” section on page 19-7 .
• Dynamically—by assigning VSANs based on the device WWN. This method is referred to as
dynamic port VSAN membership (DPVM).
See Chapter 21, “Creating Dynamic VSANs.”
Trunking ports have an associated list of VSANs that are part of an allowed list (see Chapter 15,
“Configuring Trunking” ).
Assigning Static Port VSAN Membership
To statically assign VSAN membership for an interface port), follow these steps:
Displaying VSAN Static Membership
To display the VSAN static membership information, use the show vsan membership command (see
Example 19-1 through Example 19-3 ).
Step 4
switch(config-vsan-db)# vsan 2 name TechDoc
updated vsan 2
Updates the VSAN with the assigned name
(TechDoc).
Step 5
switch(config-vsan-db)# vsan 2 suspend Suspends the selected VSAN.
Step 6
switch(config-vsan-db)# no vsan 2 suspend
Negates the suspend command issued in the
previous step.
Step 7
switch(config-vsan-db)# end
switch#
Returns you to EXEC mode.
Command Purpose
Command Purpose
Step 1
switch#
config t
Enters configuration mode.
Step 2
switch(config)# vsan database
switch(config-vsan-db)#
Configures the database for a VSAN.
Step 3
switch(config-vsan-db)# vsan 2
Creates a VSAN with the specified ID (2) if
that VSAN does not exist already.
Step 4
switch(config-vsan-db)# vsan 2 interface fc1/8
Assigns the membership of the fc1/8 interface
to the specified VSAN (VSAN 2).
Step 5
switch(config-vsan-db)# vsan 7 Creates another VSAN with the specified ID
(7) if that VSAN does not exist already.
Step 6
switch(config-vsan-db)# vsan 7 interface fc1/8
Updates the membership information of the
interface to reflect the changed VSAN.
switch(config-vsan-db)# no vsan 7 interface
fc1/8
Removes the interface from the VSAN.