HP 9124 - Cisco MDS Fabric Switch, Руководство по настройке

Страница: 114 / 1444

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-30
Cisco MDS 9000 Family CLI Configuration Guide
OL-16184-01, Cisco MDS SAN-OS Release 3.x
Chapter 2 Before You Begin
Using Switch File Systems
Caution
If a file with the same name already exists in the destination directory, that file is overwritten by the
moved file.
This example moves the file called samplefile from the root directory of the slot0: file system to the
mystorage directory.
switch# move slot0:samplefile slot0:mystorage/samplefile
This example moves a file from the current directory level.
switch# move samplefile mystorage/samplefile
If the current directory is slot0:mydir, this command moves slot0:mydir/samplefile to
slot0:mydir/mystorage/samplefile.
Copying Files
The copy command copies a file between file systems within a switch.
Note
Use the dir command to ensure that enough space is available in the target file system. If enough space
is not available, use the delete command to remove unneeded files.
The syntax for the copy command follows and is explained in Table 2-5 .
switch# copy scheme : [ // module / ] filename scheme : [ // module / ] filename
This example copies the file called samplefile from the root directory of the slot0: file system to the
mystorage directory.
switch# copy slot0:samplefile slot0:mystorage/samplefile
This example copies a file from the current directory level.
switch# copy samplefile mystorage/samplefile
Table 2-5 copy Command Syntax
Scheme Module File Name
bootflash sup-active
sup-standby
sup-1, module-5
1
, or module-7
2
sup-2, module-6
1
, or module-8
2
sup-local
sup-remote
1. Cisco MDS 9506 and Cisco MDS 9509 switches
2. Cisco MDS 9513 Directors
User-specified
slot0 — User-specified
volatile — User-specified
nvram — startup-config or snapshot-config
system — running-config