HP 64783A, Руководство пользователя

Страница: 183 / 816

To run programs until a selected address occurs
•
When displaying memory in mnemonic format, position the mouse pointer over the
line that you want to run until; then press and hold the select mouse button and
choose Run Until from the popup menu.
•
Place the address you want to run until in the entry buffer; then choose
Execution
→
Run
→
until().
•
Using the command line, enter:
run until <address>
When you run until an address, a breakpoint is set at the address and the program is
run from the current program counter until the breakpoint is hit.
This command is useful for bypassing large areas of code. For example, you may
want to run your program through the program startup code until the "main"
function begins so that you can begin testing your code at "main".
When using the command line, you can combine the various types of run-from
commands with the run-until command; for example, you can run from the transfer
address until the start of a routine you wish to test.
You may need to enable breakpoints before "run until" will work. See "To enable
or disable the breakpoint feature" later in this chapter.
Chapter 4: Using the Emulator
Using Processor Run Controls
153