HP 64783A, Руководство пользователя

Страница: 320 / 816

•
To initialize with user-defined files (activity or duration measurement), specify the
SPMT address or time ranges to use by placing the information in a file and
entering the file name in the performance_measurement_initialize command.
The formats for the address range file (activity measurements) and time range
file (duration measurements) are described in this chapter.
•
To include program symbols (procedure name or static), user defined address
ranges, and comments in address range files, refer to this example file:
# Any line which starts with a # is a comment.
# All user’s labels must be preceded by a "|".
|users_label 10H 1000H
program_symbol
# A program symbol can be a procedure name or a static. In the case of a pro-
# cedure name the range of that procedure will be used.
|users_label2 program_symbol1 -> program_symbol2
# "->" means through. The above will define a range which starts with symbol1
# and goes through symbol2. If both symbols are procedures then the range will
# be defined as the start of symbol1 through the end of symbol2.
dir1/dir2/source_file.s:local_symbol
# The above defines a range based on the address of local_symbol.
•
To include comments and units for time ranges in time range files, refer to this
example file:
# Any line which starts with a # is a comment.
1 us 20 us
10.1 ms 100.6 ms
3.55 s 6.77 s
# us microseconds
# ms milliseconds
# s seconds
#
# The above are the only abbreviations allowed. The space between the number
# and the units abbreviation is required.
Time units can be in microseconds (us), milliseconds (ms), or seconds (s).
Chapter 7: Making Software Performance Measurements
To use the Software Performance Measurement Tool
290