HP 64783A, Руководство пользователя

Страница: 775 / 816

Target Program
The program you are developing for your product. It is also called user
program.
Target System
the circuitry where the emulator probe is connected (typically a
microprocessor-based system under development).
Target System Memory
storage that is present in the target system.
Terminal Interface
the command interface present inside the HP 64700 Series emulators
that is used when the emulator is connected to a simple data terminal.
This interface provides on-line help, command recall, macros, and
other features which provide for easy command entry from a terminal.
Trace
a collection of states captured synchronously by the analyzer.
Trigger
the condition that identifies a reference state within an analyzer trace
measurement.
Trigger also refers to the analyzer signal that becomes active when the
trigger condition is found. The trigger signals are called trig1 and trig2.
They are bidirectional signal lines that can be used to coordinate
measurement activity between emulators and analyzers installed in the
instrumentation card cage, and between instruments connected to the
BNC on the rear panel of the card cage. For details of how to
configure and use trig1 and trig2, refer to the chapter on "Tasks you can
do with the deep analyzer" in this manual, and the chapter on making
coordinated measurements in your emulator/analyzer manual(s).
Note that there is delay when you use trig1 and/or trig2 for
measurement coordination. For example, you may specify that the
emulator break to its monitor program when it receives trig1 from the
analyzer. Several states may be executed in the emulator between the
Glossary
Target Program
745