HP 255 G3 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 128

background image

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download and

install a BIOS update only when the computer is connected to reliable external power using the AC adapter.

Do not download or install a BIOS update while the computer is running on battery power, docked in an

optional docking device, or connected to an optional power source. During the download and installation,

follow these instructions:
Do not disconnect power from the computer by unplugging the power cord from the AC outlet.
Do not shut down the computer or initiate Sleep.
Do not insert, remove, connect, or disconnect any device, cable, or cord.

1.

From the Start screen, type

support

, and then select the

HP Support Assistant

app.

2.

Click

Updates and tune-ups

, and then click

Check for HP updates now

.

3.

Follow the on-screen instructions.

4.

At the download area, follow these steps:

a.

Identify the most recent BIOS update and compare it to the BIOS version currently installed on

your computer. If the update is more recent than your BIOS, make a note of the date, name, or

other identifier. You may need this information to locate the update later, after it has been

downloaded to your hard drive.

b.

Follow the on-screen instructions to download your selection to the hard drive.
If the update is more recent than your BIOS, make a note of the path to the location on your hard

drive where the BIOS update is downloaded. You will need to access this path when you are ready

to install the update.

NOTE:

If you connect your computer to a network, consult the network administrator before installing

any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download

is complete. If no instructions are revealed, follow these steps:

1.

From the Start screen, type

file

, and then select

File Explorer

.

2.

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3.

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains the

update.

4.

Double-click the file that has an .exe extension (for example,

filename

.exe).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Using HP PC Hardware Diagnostics (UEFI)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run

diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside

the operating system so that it can isolate hardware failures from issues that are caused by the operating

system or other software components.

74

Chapter 7 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) in Windows 8.1

«
...
80
81
82
83
84
...
»

Содержание 255 G3

































































































































Отзывы:

Нет отзывов

Похожие инструкции для 255 G3

Бренд: Acer Страницы: 113

Aspire 4240 Series

Бренд: Acer Страницы: 13

Бренд: Acer Страницы: 106

Aspire 3000 Series

Бренд: Acer Страницы: 123

Бренд: Acer Страницы: 320

Aspire 1360 Series

Бренд: Acer Страницы: 104

Aspire 3810T Series

Бренд: Acer Страницы: 100

Бренд: Acer Страницы: 157

Aspire 3000 Series

Бренд: Acer Страницы: 84

Aspire 3000 Series

Бренд: Acer Страницы: 80

Бренд: Gateway Страницы: 7

ToughBook CF-72 Series

Бренд: Panasonic Страницы: 68

Touchbook CF-50 Series

Бренд: Panasonic Страницы: 56

Toughbook CF-T8EWATZJM

Бренд: Panasonic Страницы: 133

Toughbook CF-T8EWATZJM

Бренд: Panasonic Страницы: 40

Toughbook CF-31AGP7B2M

Бренд: Panasonic Страницы: 36

Toughbook CF-H1ADBAZCM

Бренд: Panasonic Страницы: 113

Бренд: Dell Страницы: 322

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды