HP 255 G3 Скачать руководство пользователя страница 100

Страница: 100 / 128

Press

f11

while the computer boots.

– or –
Press and hold

f11

as you press the power button.

Select

Troubleshoot

from the boot options menu.

Select

Recovery Manager

, and then follow the on-screen instructions.

Using HP Recovery media to recover

You can use HP Recovery media to recover the original system. This method can be used if your system does

not have an HP Recovery partition or if the hard drive is not working properly.

If possible, back up all personal files.

Insert the HP Recovery media that you created, and then restart the computer.

NOTE:

If the computer does not automatically restart in HP Recovery Manager, change the computer

boot order. See

Changing the computer boot order on page 92

Follow the on-screen instructions.

Changing the computer boot order

If computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the

order of devices listed in BIOS where the computer looks for startup information. You can change the

selection for an optical drive or a USB flash drive.
To change the boot order:

Insert the HP Recovery media you created.

Restart the computer, quickly press

esc

, and then press

for boot options.

Select the optical drive or USB flash drive you want to boot from.

Follow the on-screen instructions.

Removing the HP Recovery partition (select models only)

HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space.

IMPORTANT:

After you remove the HP Recovery partition, you can no longer use the Windows Refresh

option or the Windows option to remove everything and reinstall Windows. In addition, you will not be able to

perform System Recovery or Minimized Image Recovery from the HP Recovery partition. So before you

remove the Recovery partition, create HP Recovery media; see

Creating HP Recovery media on page 89

Follow these steps to remove the HP Recovery partition:

From the Start screen, type

recovery

, and then select

HP Recovery Manager

Select

Remove Recovery Partition

, and then follow the on-screen instructions.

Chapter 11 Backing up, restoring, and recovering in Windows 8.1

Содержание 255 G3

































































































































Результаты поиска

Содержание 255 G3

Отзывы:

Похожие инструкции для 255 G3

Бренды по названию

Популярные бренды

HP 255 G3, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание 255 G3

Отзывы:

Похожие инструкции для 255 G3

Бренды по названию

Популярные бренды