background image

27 of 61

Indesit

Company

Service Manual UK

English

10

Black Out Safe

This icon will blink if the freezer compartment temperature has 
risen above - 9°C during the black out period. The user should not 
re-freeze any thawed food and should not restock freezer until 
optimal temperature has been reached. Freezer icon 1 shows the 
warmest temperature that the freezer reached while in Black Out. 
After the reset button (D) is pressed, the alarm goes off and the 
freezer temperature reverts back to the desired temperature set by 
the user prior to the black out. It can take a few hours to reach this 
temperature depending on how high the temperature got to and if 
there is a fault or another black out before it reached the desired 
temperature.

11

Control Panel 
Lock / Child Lock

This symbol will be on when control panel/child lock has been 
activated by pressing (D) and (E) and holding the reset and holiday 
buttons until the padlock appears in the top of the display.
To deactivate, press and hold the reset and holiday buttons until 
the padlock disappears.

12

I Care

Press Ice Mode (C) and RESET (D) to activate/de-activate
I Care. This function saves energy. It will turn the display into 
stand-by leaving only the I care symbol on. Note: All function 
buttons will still operate when pressed and then the display will 
then automatically go back to stand-by mode after approximately 
30 seconds.

13

Warning

This warning light icon activates when the high temperature alarm 
is on or if there has been any component electrical failure.

14

Water Filter 
Symbol

When a new filter cartridge is present then this symbol will be 
green. When the icon becomes yellow, the filter is almost 
exhausted and the filter cartridge will need replacing shortly.
When the icon becomes red, the filter should be replaced.
Press and hold RESET (D) to revert this icon 14 back to green 
once the filter has been replaced with a new one. If it still has not 
reverted to green check the filter cartridge for correct install.
See Page 12 for Water Filter information.

Содержание MSZ900DFUK






























































Отзывы: