Use in the field
¾
For settings to the fans and the drill unit
please follow the notes in the corresponding
chapters.
At the headland
¾
Floating position on the "Lift/Lower" control
unit is not required.
¾
During use accelerate evenly and not too
much.
¾
At the headland do not reduce the fan speed
too early and too far.
¾
Otherwise
fertilizer
would remain in the hoses
and cause blockage.
The
fertilizer
hoses are not monitored by the
E-
Manager.
Adjusting the metering delay
When starting to use the machine the grains
from the individual metering units drop directly
on the field.
fertilizer
needs approx. 1 - 2 sec. longer for this,
depending on the working speed
fertilizer
will
only drop after the first few meters.
In E-Manager one can set a delay for the
seed metering after the
fertilizer
metering,
so that seed and
fertilizer
will be in the
ground at the same time.
This delay is factory set to "0". The delay can
be set in 0.1 second steps up to a value of max.
2 seconds.
Once use in the field has been started a
warning
tone will sound from the start of
fertilizer
meter-ing to the start of individual
grain metering. This gives the driver the
possibility to check the delay. Due to the delay
the machine must be lowered earlier.
Setting see E-Manager.
Setting - Seed offset.
51
