
2. Connect Brine Discharge Line with the supplied 20 feet (6 meters) of 3/8” (9.5 mm) O.D. Brine
Discharge Tubing:
to Inlet of:
from Outlet of:
Step
***Discharge Rinse Clean Valve
(center port)
ETD
located inside the system frame
1.
**Rinse Clean bucket or container
***Discharge Rinse Clean Valve
(left or right port)
2.
Brine Discharge Connector
***Discharge Rinse Clean Valve
(left or right port)
3.
3. Connect Product Water Line with the supplied 30 feet (9.14 meters) of 3/8” (9.52 mm) O.D. nylon
tubing:
to Inlet of:
from Outlet of:
Step
Brine Discharge Tee
Product Water Manifold Port "B" Unpotable
located inside the system frame
1.
Charcoal Filter
Product Water Manifold Port "A" Potable
located inside the system frame
2.
***pH Neutralizing Filter
Charcoal Filter
4.
***UV Sterilizer
***pH Neutralizing Filter
5.
**Potable Water Storage Tank Connector
***UV Sterilizer
5.
4. Connect Pressure pick-up with Pressure Gauges with the supplied 20 feet (6 meters) of 1/4” (6.35
mm) O.D. nylon tubing:
to Inlet of:
from Outlet of:
Step
Inlet Compound Vacuum/Pressure Gauge
located inside the system frame
Booster Pump Pressure Pick Up Tee
located on booster pump
1.
Ultraviolet (UV) Light Installation
The SP-Series UV unit is shipped with the UV lamp, quartz sleeve, fittings and O-rings and needs to
be assembled before the UV unit can be used.
1. Install the UV unit in a sheltered, well-ventilated area.
2. Install the UV unit as close as possible to the point-of-use to avoid potential contamination discharge
from pipes, fittings, etc.
3. The UV unit should be mounted on stable support to avoid straining or warping. Allow sufficient
clearance around the unit for servicing.
4. Verify the location is free from vibration.
5. All UV units are rated for maximum operating pressure at 50psig (8.24 bar).
6. The UV unit must be properly grounded for safe and proper operation. Failure to properly ground
the UV unit automatically voids all unit warranty.
7. Line voltage must be within 10.56V to 16.50V. Voltage outside the range will compromise the
performance of the UV unit.
37
Installation
Содержание Seafari Escape 200
