Horizon Reverse Osmosis Seafari Escape 200, Руководство пользователя

Страница: 22 / 126

position diverts the un-potable Product Water to discharge through the Brine Discharge Tee
Connector.
4. Flow Meter, Product Water measures the rate of Product Water flow in gallons per hour from the
RO Membrane Element.
5. Charcoal Filter is designed to remove foul odors from the Product Water. Sulfurous smell (rotten
egg smell) is caused by decaying biological matter in the Feed Water chapter. Fresh water flushing
of the System helps to minimize the source of this odor.
6. pH Neutralizer Filter*** The Product Water produced by Reverse Osmosis is slightly acidic. The
pH Neutralizer Filter neutralizes the pH of the Product Water.
7. UV Sterilizer*** sterilizes up to 99.9% of viruses, bacteria and other micro-organisms that may pass
through the RO Membrane Element. The UV sterilizer is recommended if the Product Water Storage
Tank is not treated by chlorination, etc.
8. Potable Water Storage Tank Tube Connector is used to connect the Systems Potable Product
Water output to the Potable Water Storage Tank.
9. Potable Water Storage Tank** may be any container suitable for storing Potable Water.
Fresh Water Flush and RO Membrane Element Cleaning
The Fresh Water Flush rinses the high salinity Feed Water from the System with Fresh Water. This
process is automatic at each shut down of the System and repeats automatically every 7 days. Fresh
Water Flushing replaces the seawater in the System with less corrosive fresh water. This reduces the
biological growth that naturally occurs if the Feed Water (sea water) is left to stand in the System.
Optional, manually operated valves are also available for ease of rinsing and cleaning the RO Membrane
Element.
1. Fresh Water Flush Pump, included with the Fresh Water Flush Assembly. The Fresh Water Flush
Pump draws fresh water from the Potable Water Storage Tank and pushes the water, at 45 PSI,
through the Fresh Water Flush Charcoal Filter and into the rest of the System.
2. Fresh Water Flush Carbon Filter, included with the Fresh Water Flush Assembly. The Carbon Filter
removes particulate matter and chlorine from the fresh water to prevent chlorine attack to the RO
Membrane Element.
3. Fresh Water Flush Check Valve, included with the Fresh Water Flush Assembly. The Check Valve
routes the fresh water to the System and prevents the fresh water from expelling out the Inlet Thru
Hull Fitting.
4. Inlet Rinse Clean Valve*** used in conjunction with the Discharge Rinse Clean Valve simplifies the
storage and cleaning procedures by allowing the operator to turn a valve rather than disconnect a
hose. Also used for a manual fresh water flush if the Automatic Fresh Water Flush System is not
installed.
5. Discharge Rinse Clean Valve*** used in conjunction with the Inlet Rinse Clean Valve simplifies the
storage and cleaning procedures by allowing the operator to turn a valve rather than disconnect a
hose.
6. Rinse/Clean Solution Container** used to hold rinse water, storage solution, winterization solution,
or cleaning solution may be any 5 gallon or larger container (portable or permanently installed).
Electronic Components
The System’s electronic components measure water quality, control the direction of Product Water
flow, Start and Stop the System, and contain the central electrical connection point. They also ensure
only potable Product Water passes into the Product Water Storage Tank.
1. Salinity Controller monitors the salt content of the product water via the Salinity Probe, and signals
the 3-Way Product Diversion Valve when Potable Water is being produced. The 3-Way Product
Diversion Valve, Booster Pump Motor, Remote Control, UV Sterilizer, and Soft Motor Starter are
Seafari Escape 200-600 22