Horiba Scientific DeltaMyc J810018, Руководство по эксплуатации

Страница: 11 / 80

DeltaMyc Operation Manual J810018 (7 Oct 2014) Introduction
0-5
Safety summary
The following general safety precautions must be observed during all phases of opera-
tion of this instrument. Failure to comply with these precautions or with specific warn-
ings elsewhere in this manual violates safety standards of design, manufacture and in-
tended use of instrument. HORIBA Instruments Incorporated assumes no liability for
the customer’s failure to comply with these requirements. Certain symbols are used
throughout the text for special conditions when operating the instruments:
A WARNING notice denotes a hazard. It calls at-
tention to an operating procedure, practice, or sim-
ilar that, if incorrectly performed or adhered to,
could result in personal injury or death. Do not
proceed beyond a WARNING notice until the in-
dicated conditions are fully understood and met.
HORIBA
Instruments Incorporated
is not responsi-
ble for damage arising out of improper use of the
equipment.
A CAUTION notice denotes a hazard. It calls at-
tention to an operating procedure, practice, or sim-
ilar that, if incorrectly performed or adhered to,
could result in damage to the product. Do not pro-
ceed beyond a CAUTION notice until the indicat-
ed conditions are fully understood and met.
HORIBA
Instruments Incorporated
is not responsi-
ble for damage arising out of improper use of the
equipment.
Laser light! Wear protective goggles, full-face
shield, skin-protection clothing, and light-blocking
gloves. Do not look directly at the beam and al-
ways observe appropriate safety procedures.
Ultraviolet light! Wear protective goggles, full-
face shield, skin-protection clothing, and UV-
blocking gloves. Do not stare into light.
Intense ultraviolet, visible, or infrared light! Wear
light-protective goggles, full-face shield, skin-
protection clothing, and light-blocking gloves. Do
not stare into light.
Caution:
Caution:
Warning:
Caution:
Warning: