Horiba Scientific DeltaMyc J810018, Руководство по эксплуатации

Страница: 30 / 80

DeltaMyc Operation Manual J810018 (7 Oct 2014) Requirements & Installation
2-8
a
Connect the DeltaHub power inlet and power switch.
The
Power
inlet connects the DeltaHub to your AC (mains) electricity
supply using the cable provided. The power inlet is a filtered IEC 3-pin
socket with fused live and neutral.
The module is switched on and off using the switch next to the inlet.
The mains cable must be connected to a power outlet with a ground
(earth) connection. For fuse rating and type see Specifications elsewhere
in this document. Color-coding of the supplied IEC cable is:
Brown:
Live
Blue: Neutral
Yellow/green: Earth or ground
b
Connect the DeltaDiode controller and DeltaDiode head.
The Power inlet connects the DeltaDiode controller to your AC (mains)
electricity supply using the cable provided. The power inlet is a filtered
IEC 3-pin socket with fused live and neutral.
The module is switched on and off using the switch next to the inlet. The
interlock plug must be in place to ensure proper operation. Turn
ON/OFF the laser power using the key on the front panel.
The DeltaDiode head connects to the
Drive
socket using the supplied
drive cable.
Sync Out NIM
can be connected directly to
Start
input
(
Stop
input in reverse mode) on the FluoroHub.
c
Connect the PPD photon-detection module.
The PPD’s power is connected via a 9-pin connector from the socket la-
beled
Detector
on the DeltaDiode unit to the 5-pin
Power
socket on the
PPD module. The interlock cable connects the TBX-PS unit to the Del-
taDiode controller Expansion port A.
The signal cable (Lemo 00 to BNC) connects from the
NIM out
on the
PPD to the
Stop
socket (
Start
socket in reverse mode) on the back of
the DeltaHub.
d
Connect the fluorescence camera.
The 5V DC adapter supplied with the camera connects at the back
(cooled model only). A USB cable links the camera to the host comput-
er.
Warning:
This equipment must be ground-
ed (earthed).
Note:
The camera indicator is ON only when the camera
cooling is activated.