22
Side brush Cleaning
The Side Brushes are easily worn from heavy use so you should check them regularly to
monitor their condition.
Hair and other debris may become trapped in the Side Brushes. Use the Agitator pick to
remove debris.
If the brushes fail or become caught, the LCD display will show the Trapped Brushes Warning
symbol, the Charge and Status Indicator light will turn red and an Alarm will sound.
Once fully dry reassemble
the brush and screw.
Secure the brush to the
robot by firmly tightening
the screw.
Detach any damaged
brushes by removing the
screw holding it in place.
After removing the brush,
gently lower each set of
bristles into some hot
water.
Hold each set of bristles
in the water until they
have recovered and
straightened. Then remove
and leave to dry.
nORmaL DefORmaTiOn
no maintenance required
aBnORmaL DefORmaTiOn
Replacement required
aBnORmaL DefORmaTiOn
maintenance required
Attention:
The side brushes can sometimes be deformed during transportation
or when the product is used in particular conditions. If this happens it is
possible to return to the original shape by putting the brushes in warm water.