28
The Remote Control is not
working:
The Virtual Barrier is not working:
a) The range of the Remote Control is 5 metres.
Make sure you are within this distance.
b) Check Batteries, replace if necessary.
c) Check Robot is fully charged, also check the
power supply to the Charging Station.
d) Use a dry cloth to clean the infrared Reciever
on the Robot and the Infrared Transmitter on the
Remote Control.
e) if the Robot is too close to the Virtual Barrier or
the Charging Station, they will interfere with the
signal.
a) Check Batteries, replace if necessary.
b) if the Virtual Barrier is too close to the Charging
Station, it will interfere with the signal.
c) for more coverage, more than one Virtual
Barrier can be used together. You can purchase
another Virtual Barrier from _______________
• Turn off the power immediately.
• Remove the Dust Bin, empty it and wipe it
dry with a cloth.
• Remove Agitator and wipe clean with a damp
cloth. Allow to dry.
• Allow the Robot at least 12 hours to dry.
Use a soft dry cloth to clean the screens surface.
The speed of the Robot changes:
The Robot has sucked up liquid:
If the Robot detects a lot of dust, it will lower the
speed automatically.
Remove any obstacles that may snarl the brushes.
(Loose power cords, floor length curtains, etc.)
Cleaning the LCD Screen:
The Side Brushes are damaged: