20
MAINTENANCE
Cleaning the Robot and Charging Station
Dust Bin Cleaning
1.
Turn the Robot off.
2.
Press the Dust Compartment button and open
the
lid.
3.
Rotate and pull the handle of the Dust Bin
upwards.
4.
Remove the dust bin from the Robot. Take care
not to spill dust from the Dust Bin opening.
5.
if the filter is very dirty or full of dust, open the
Door of the Dust Bin.
6.
Over a bin, tip the Dust Bin so all the dust falls
out.
Tap the Dust Bin on the edge of a bin to
release all the dust.
7.
Close the door of the Dust Bin.
8.
Replace the Dust Bin and push the Handle
down.
9.
Close the lid of the Robot.
Before performing any maintenance task, ensure the Robot is switched off.
1.
Disconnect the charging station from the mains outlet.
2.
Use a damp cloth with a little soap to clean all surfaces. Do not allow water into any part
of the product whilst cleaning.
3.
Dry with a soft cloth.
Tip:
if the Dust Bin is not refitted correctly, the Charge and Status
Indicator light will turn red and an Alarm will sound.
