21
Filter Cleaning
Open the Dust Bin door, empty the dust and wash the filter under running water.
Agitator Cleaning
Use a coin to remove the 2
screws on the Soleplate.
Remove the Agitator
frame.
Remove the belt from the
end of the Agitator and
then remove the Agitator.
Place the Agitator back
inside the Robot, taking
care to reattach the belt.
Refit the Soleplate and
replace the 2 screws.
Clean the Agitator regularly to ensure maximum cleaning performance.
Turn the Robot over.
Washing:
The filter located in the dust bin should be washed after
the bin has been emptied 5 times.
wash the filter under lukewarm running water and leave to dry for at
least 24 hours. Refit the dust bin and filter in your Robot only when
completely dry.
Remove the dust from
the belt and the Agitator
using the Agitator Pick.
