18
Installing / Replacing Batteries
• 2 x D size alkaline Batteries are provided for
use in the Virtual Barrier.
• Do not use any other type of Batteries as
they will damage the product.
• Please note + and - when fitting the
Batteries.
• Change the Batteries when you notice the
power is low.
• Remove the Batteries to avoid electrolyte
leakage occurring if the Virtual Barrier is
stored for a long time.
• Do not leave the Virtual Barrier under strong
lights or in direct sunlight as the Infrared
Transmitter may be damaged.
• Refer to the section on ‘Environmental
Considerations’ when disposing of batteries.
VIRTUAL BARRIER
Positioning:
When using the Virtual Barrier, point the Infrared
Transmitter across the area where you want to create the barrier.
Using your Virtual Barrier
The Virtual Barrier can be used to prevent the Robot cleaning certain areas. It emits an
invisible infrared beam up to a length of 2 metres.
1.
After checking the Batteries, place the Virtual
Barrier at the start of an area you want to
block from cleaning.
2.
Press the power button and the barrier is
set.