11
BefORe fiRST USe
Charging Station Setup
Before use, remove obstacles that may get in the path of the Robot. Pay attention to:
• Objects that can be easily knocked over.
• Edges of carpets or rugs that it may get caught on.
• floor length curtains and tablecloths.
• Heat sources or flammable items.
• Power cords.
• fragile objects.
Packaging:
Do not dispose of your Robots packaging. it may be required in the
future for storing or transporting your Robot.
When unpacking your Robot and its accessories, take care to keep
plastic bags away from babies, young children and animals to avoid
the risk of suffocation.
Before using your Robot for the first time, you must fully charge it. This will take approximately
12 hours. Do not expose the Robot or Charging Station to temperatures below 0°c or above
30°c as this may damage the Battery. The Charging Station must only be connected to a
standard mains power outlet.
CHaRGinG yOUR ROBOT
1.
place the Charging Station on a non-reflective
level floor, preferably against a wall. if the
floor surface is too reflective, it will interfere
with the Robots navigation system and it may
have difficulty locating the Charging Station.
2.
There should not be any objects in the area
around the Charging Station for 1.5m in front
and 0.5m to each side.
3.
Plug in the Charging Station. Make sure the
Power Cord is not caught underneath the
Charging Station.
4.
Make sure the Power Cord is not tangled or
stretched. If there is an excess, use the Power
Cord Tie to store it neatly.
5.
Check that the Dust Bin is inside the Robot.
6.
Guide your Robot into the Charging Station to
begin charging.
1.5m
0.5m
0.5m
