29
The fuse is an f5aL250V
5A, 250V. .
Turn your Robot over and
place it on a level surface.
Remove the screw from
the fuse cover.
Remove the old fuse and
replace it with a new one.
your Robot is fitted with a replaceable fuse . its function is to protect the electronics inside
the Robot.
Only use Hoover approved replacement parts for your Robot. Use of parts that are not
approved by Hoover are dangerous and will invalidate your warranty.
Before attempting to change the fuse, make sure your Robot is turned Off.
RepLaCinG THe fUSe
The Environment
This appliance is marked according to the European Directive 2002/96/EC on Waste Electrical
and electronic equipment (weee). By ensuring this product is disposed of correctly you will
help prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product.
The symbol on the product indicates that this product may not be treated as houshold waste.
Instead it shall be handed over to the appliance collection point for recycling of electrical and
electronic equipment. Disposal must be carried out in accordance with the local environmental
regulations for waste disposal.
for more detailed information about treatment, recovery and recycling of this product, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
Your Guarantee
The guarantee conditions for this appliance are as defined by our representative in the
country in which it is sold. Details regarding these conditions can be obtained from the
dealer from whom the appliance was purchased. The bill of sale or receipt must be produced
when making any claim under the terms of this guarantee.
Subject to change without notice.
impORTanT infORmaTiOn
if replacing the fuse does not rectify the problem, please call Hoover Customer Service on
___________
