Honeywell VISTA-128BPT Скачать руководство пользователя страница 68 | Manualshive

Страница: 68 / 124

Honeywell VISTA-128BPT Скачать руководство пользователя страница 68

VISTA-128BPT/VISTA-250BPT Installation and Setup Guide

5-12

FIELD

TITLE and DATA ENTRIES

EXPLANATION

2

∗

∗

∗

∗

07

Auto-Disarm Delay (partition-
specific)

00

= no delay.

01-14

times 4 minutes (04-56) delay.

15

= no auto disarming.

This is the time between the end of the disarming window and the start of auto
disarming of the system.

2

∗

∗

∗

∗

08

Force Arm Enable for Auto-Arm
(partition-specific)

0

= disable

1

= enable

If enabled, the system automatically bypasses any faulted zones when it
attempts to auto-arm.
If disabled, the system will not auto-arm.

ULC

Force Arming is not a ULC Listed feature and
must be disabled for ULC installations.

2

∗

∗

∗

∗

09

Open/Close Reports by
Exception (partition-specific)

0

= disable

1

= enable

If enabled, Open/Close reports are sent

only if

the openings/closings occur

outside

the arm and disarm windows.

NOTES:

Open reports are also suppressed during the closing window in order to
prevent false alarms if the user arms the system, then re-enters the premises,
for example to retrieve a forgotten item.
Openings and closings are still recorded in the event log.

2

∗

∗

∗

∗

10

Allow Disarming Only During
Arm/Disarm Windows (partition-
specific)

0

= disable

1

= enable

If enabled, disarming of the system is allowed only during the
arming/disarming windows, or if the system is in alarm (if 2

∗

11 is set to 1).

NOTE:

This applies

only

to Operator-level users. Installer, Master, and

Manager-level users can disarm the system at any time.

NOTE:

Duress users behave the same way as Operator-level users.

2

∗

∗

∗

∗

11

Allow Disarm Outside Window if
Alarm Occurs

0

= disable

1

= enable

If enabled, allows the system to be disarmed outside the programmed disarm
(opening) window if an alarm has occurred. Otherwise disarming is allowed
only during the disarm window.

NOTE:

Used only if field 2

∗

10 is enabled.

2

∗

∗

∗

∗

18

Enable GOTO for this Partition
(partition-specific)

0

= disable

1

= enable

If enabled, this partition can be accessed from another partition’s keypad
using the GOTO command.

2

∗

∗

∗

∗

19

Use Partition Descriptor

0

= disable

1

= enable

If enabled, the normal keypad display will include a partition number and four-
digit descriptor.

2

∗

∗

∗

∗

22

Display Fire Alarms of Other
Partitions (partition-specific)

0

= disable

1

= enable

If enabled, allows fire alarms that occur on other partitions to be displayed at
this partition’s keypad(s).

2

∗

∗

∗

∗

23

Display Burg, Panic and CO
Alarms for Other Partitions
(partition-specific)

0

= disable

1

= enable

If enabled, allows burglary, panic and CO alarms that occur on other partitions
to be displayed at this partition’s keypad(s).

2

∗

∗

∗

∗

24

Display Troubles of Other
Partitions (partition-specific)

0

= disable

1

= enable

If enabled, allows troubles that occur on other partitions to be displayed at this
partition’s keypad(s).

«
...
66
67
68
69
70
...
»

Содержание VISTA-128BPT





























































































































Отзывы:

Нет отзывов